Ads by Google
XL serise Industrial Oven
The series oven easy to use, equipment, practical and functional, the price is reasonable.The oven is suitable for most industrial uses: heating, degassing, paint, polymer, preheating, curing, drying, tempering, stability testing, curing, testing, and so on.All the industrial oven have a strong ventilation, to ensure the accuracy and temperature uniformity.
Operating Environment:
Design temperature 200 °C or choose 300 °C. Float temperature: less than ± 0.2 °C. The spatial variation of temperature: 105 degrees is less than ± 1.2 °C, 200 degrees is less than ± 2.5 °C (test method, according to EU standards of international NFC15-140, the sensor with nine different points on the two-hour test.)
Construction:
8 different sizes of oven volume rose from 125 to 2520 liters, in addition to model XL0686, XL1400, XL1800, XL2520 oven control panel is placed in the left hand side, the other types of oven control panel is placed in the oven and the top used to reduce the size of the oven, optimize the structure of the oven. Interior with high quality stainless steel, corrosion-resistant and strong materials, internal polishing. Shell is made of cold rolled steel, formed with epoxy paint. (Light gray color is RAL7035) liner and the shell without any contact, high-quality thermal insulation layer to effectively reduce heat loss. Outside the box and the liner from the rock wool in isolation layer 110 mm thick, to ensure the effective control of heat, the outside temperature and excellent thermal insulation function. Isolation materials and pads contain asbestos. The right to open the door, the door latch from the world two-point close. Internal air circulation fan: Oven is fan forced circulation mode, high-speed air flow to speed up the drying rate, but also to speed up the temperature distribution within the oven evenly. Centrifugal blower mounted on top of the oven, stainless steel bezel and isolation between the studio. Air from the top to the center of the oven into the fan, temperature sensor and is covered by heating the original. Distribution of heated air through the fan at the top of the oven recycling. Air circulation can not be stopped, but you can install a transmission speed of air circulation for the regulator. Exhaust air, fresh air supply: Before entering the chamber air through the ventilation holes with a diameter of 60,80 set warm or 100 mm exhaust emissions (which can be selected in the sample), through adjustable valve to control emissions. An exhaust fan to increase as the choice for accelerating emissions. Can also add anti-dust and air filter. Temperature control and security: J-type temperature sensor is a thermocouple, the temperature is accurate control of the microprocessor chip processor to maintain a high degree of accuracy, to prevent over temperature setting. The thermostat can be adjusted independently over-temperature protection limit, which provides a 2.1 to set the standard of protection. PID auto-tuning digital controller, digital display setting and actual temperature and heating indicator light. Switch on the control button layout, when the fault indicator light, said safety device to work. Ancillary equipment: Shelves can be placed placed to adjust the level of material, if necessary, additional Shelves. In the left side of the oven have a standard diameter of 20 mm channel, the channel is equipped with a rubber plug. Order requirements: Can be customized according to customer requirements related to studio space dimensions and before and after the two door, cart space.
Oven Type
| Internal Size (WxDxH) | Shell Size (WxDxH) |
RC-XL0125 | 500 x 500 x 500 | 750 x 750 x 1000 |
RC-XL0343 | 700 x 700 x 700 | 935 x 1125 x 1250 |
RC-XL0490 | 700 x 700 x 1000 | 950 x 1130 x 1676 |
RC-XL0686 | 700 x 700 x 1400 | 950 x 1133 x 2106 |
RC-XL1000 | 1000 x 1000 x 1000 | 1250 x 1529 x 1670 |
RC-XL1400 | 1000 x 1000 x 1400 | 1541 x 1518 x 2125 |
RC-XL1800 | 1000 x 1000 x 1800 | 1415 x 1495 x 2520 |
RC-XL2520 | 1400 x 1000 x 1800 | 1815 x 1495 x 2520 |