Subscriber Terminal Block Module Disconnect STB Module Disconnection Module FTTx Terminal Solutions Wire Connection Module

The Subscriber Terminal Block module provide a connection point between an exchange-side cable pair and a distribution pair. It incorporates a 5-point plug in module to provide continuity and a range of other options. Removal of the plug-in module does not disturb wire connections but makes contacts to them available for testing of both sides of the network, DWP is a termination, protection and test device, intended for connecting external lines  to the customer networks. The copper pairs are terminated by screw-operated IDC contacts, designed for wire diameters in the range 0,6 ÷1,25 mm. 

Features

• Insulation displacement (IDC) Type Connections

• No wire stripping required.

• No special tools required for installation.

• Will accept 0.4 - 1.0mm (26-18 gauge) conductors.

• Totally encapsulated wire connection points provide complete protection from all environmental conditions.

• Visually inspect the integrity of all wire connections.

• Reusable - wires may be removed and reinserted without affecting IDC contacts or integrity of seal.

• Will permit up to 100 wire terminations on both line and subscriber side connections.

• Rugged Design and Construction.

Applications

• Designed for mounting on standard DIN rails.

• DIN rail doubles as an earth point.

1 pair drop wire connection module without protection (STB)Drop Wire Connection Module Without Protection (STB)

ANSHI 1 pair Subscriber Terminal Block Module (STB)

ANSHI 1 Pair Subscriber Terminal Block Module Without Protection

Subscriber Terminal Block ModuleDrop Wire ModuleDisconnection ModuleFTTH Corridor Terminal Box Wire Connection Module

DROP WIRE TERMINATION

Cross-Connect Terminal Block Module

Disconnect Terminal Block Module

STB Terminal Block ModuleFTTH Corridor Terminal Box Wire Connect Module

                                   

 

Subscriber Terminal Block Module Without Protection Unit