Clear Connector (Endcap) for Microduct HDPE Microduct endcap Quick connector 3~16mm O.D. Easy installation

MicroDuct Endcap 

To keep MicroDuct networks free of debris, seal the system with Push-Fit End Caps. With the same functionality as the Push-Fit Connectors, installation simply involves pushing the MicroDuct into the End Cap. The End Cap can be attached and removed 10 times while still maintaining the same high performance characteristics.

Push-Fit MicroDuct End caps operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi). 

Feature:

Material:	Clear PC
Leakage Pressure:	15bar
Negative Pressure:	-750mmHg(10 Torr)
Proof Pressure:	25bar
Temperature Range:	-10 ~ 60°C
For Tubing Type:	PE, PU, Nylon, Polyurethane

Specification:

No.	Description	Model No.	For Tube OD(mm)
1	3mm End cap	E03	3
2	4mm End cap	E04	4
3	5mm End cap	E05	5
4	6mm End cap	E06	6
5	7mm End cap	E07	7
6	8mm End cap	E08	8
7	10mm End cap	E10	10
8	12mm End cap	E12	12
9	14mm End cap	E14	14
10	16mm End cap	E16	16

Clear Connector (Endcap)