1. Cat.6 STP RJ45 Adaptor and Cat.5E STP RJ45 Adaptor UTP through Keystone Jack Pass-thru Keystone Jack Shielded Keystone Jack 2. 1) Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements. 2) Meet TIA/EIA TSB-40 3) Meet ISO/IEC Generic Cabling Standard 11801 4) Meet CENELEC Generic Cabling Standard EN50173 3. Electrical: 1) According to UL 1863 2) Current rating: 1.5 Amp Max. 3) Voltage rating: 150 Volts 4) Contact resistance: 20 m-ohm 5) Insulation Resistance: 500M-ohm 6) Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min 4. Materials: 1) Housing: PC UL94V-0 2) IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. 3) PCB: FR4 1.6mm(0.04") thickness, 2 layers 4) Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.
Meets FCC parts 68 ANS, TIA, EIA-568B ISO, IEC 11801 ETL verified EIA/TIA T568B: Cat.6 channel link Transmission performance Physicals: IDC connector accept 22-26 AWG solid wire Jack wiring: 50-micron inch gold plate over 100-micron inch nickel Housing: high impact flame retardant plastic UL94V-0 rated IDC connector suitable for 110 punch down and Krone tool Mechanical: Plug insertion life: 750cycle/minute Plug retention force: 30lbs/minute Electrical: Current rating: 1.5A Insulation resistance: 500M Ohms minimum Contact resistance: 20 Milli-ohms maximum DC resistance: 0.1 Ohms maximum Data transmission rates up to 250Mbps