1.5w constant current led driver 2.100% full load aged 3.High efficiency&high reliability 4.2-year warranty 5.CE RoHS

Features:

·International full-range input voltage

·Protection: shortcircuit/overload/overvoltage/overheat

·Natural air cooled

·100% full load aged

·Idle power < 0.5W

·All capacitors are 105°C long-life electrolytic

·Capacity of surge of 300VAC: 5 seconds

·Working temperature up to 70°C

·Passes 5G vibration test

·High efficiency, long life & high reliability

·2-year warranty

·Waterproof grade: IP67

Specifications:

Product No.		HF-005-18-9-0A32
Output	DC voltage	9-18v
	Current	300mA
	Vltg range	9-18v
	Power	5W
	Ripple & noise	100mV P-P
	Current accuracy	±10mA
	Linear adj	±5%
	Load adj	±5%
	Start & rise	1000mS,3mS\230VAC   1000mS\115VAC(full loaded)
Input	Voltage	90-264VAC
	Frequency	47-63Hz
	Efficiency	75%
	AC current	0.05A\230V  0.1A\115V
	Surge	Cold start:230V 20A
	Current leak	<2mA\230VAC
Protection	Output shortcircuit	Mode:Hiccup with automatic recovery when output shortcircuit is over
	Overheat	Overheat protection starts when transistor contact temperature is over 130°C
		Mode: output voltage shut-off with automatic recovery when temperature return to normal
Environment	Working temp.	-20~ +60°C
	Working Hmdty	5-95%RH
	Storage Temp.	-40~ +80°C,
	Vibration proof	10~500Hz,5G 10min/round,X, Y, Z axes 60 sec. Each
Safety rules and electro-magnetic tolerance (Note 6)	Regulations	GB195110.1-2004/IEC61347-1:2003  CE(EMC+LVD)
	Voltage	I/P-O/P:1.5KVAC   IP-GND:1.5KVAC
	Insulation	I/P-O/P:I/P-FG,O/P-FG:100MOhms/500VDC/25°C/70%RH
	EM irradiation	EN 55015:2006;EN61000-3-2:1995+A2:2005
	EM disburbance proof	EN 61000-3-2:2006;
	Size	71*30*20
	Packing	0.014Kg
Notes:	1. Unless otherwise stated, all data are taken in the condition of 230VAC input, rated load, and 25°C.
	2. Ripple and noise measurement: with a 12” double ripple cord, parallel connected with 0.1-μF and 47-μF capacitors, the data are measured in 20MHz brandwidth.
	3. Accuracy: including preset error, linear adjustment and load adjustment rate.
	4. Linear adjustment rate: from low voltage to high voltage, measured under rated load
	5. Load adjustment rate: from 0% to 100% of rated load
	6. Power supply is regarded as a part of the system, which needs to be confirmed of electro-magnetic relation with terminal instruments

Part dimensions:

Tenuation curve:                                                                   Static propertie curve: