Ads by Google
Specification: led constant current driver
| Model | FSV-12030 | ||||||
| Output | Dc Voltage | 20~36V | |||||
| Rated Current | 3.45A | ||||||
| Voltage Range | 30~36V | ||||||
| Rated Power | 100W | ||||||
| Ripple&Noise(Max) | 150mV | ||||||
| Voltage Tolerance | ±4% | ||||||
| Setup,Rise Time | 100ms/220VAC | ||||||
| Hold Up Time(Typ.) | 80ms/220VAC | ||||||
| Input | Voltage Range | 170~250VAC | |||||
| Frequency Range | 47~60Hz | ||||||
| Power Factor(Typ) | PF>0.68/220VAC | ||||||
| Efficiency(Typ) | 89% | ||||||
| Protection | Short Circuit | Protection type recovers automatically after fault conditions is removed | |||||
| Overlaod | Overload protection@145~160%above peak rating | ||||||
| Over Temperature | protection typer shut down o/p voltage.re-power on to recover | ||||||
| Environment | Working Temp | -30~ +60°C(Refer to output load derating curve) | |||||
| Working Humidity | 20~90%RH no-condensing (Waterproof) | ||||||
| Storage Temp Humidity | -40~ +80°C,10~90%RH | ||||||
| Safety&Emc | Safety Standards | CE Mark(LVD),IP67 | |||||
| Withstand Voltage | I/P-O/P 1.5KVAC IP-GND 1.5KVAC | ||||||
| Emc Test Standards | EN 55015 2006; EN 61547 1995+A1 2000 ;EN 61000-3-2 2006; EN61000-3-2 1995+A2 2005EN 61347-1 2008 EN 61347-2-13 2006 | ||||||
| Connect the line request | Input:H03VV-F 3G*0.75mm Brown&blue&kelly VDE(200mm) Output:H03VV-F 2*0.75mm Black & Red VDE(200mm) | ||||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 220VAC input,rated laod and 25°C of ambient temperature. | ||||||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a12''twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | |||||||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||||||
| Bitmap | |||||||
| Others | Dimension | 177*70*40(mm)(L*W*H) | |||||
| Carton Quantity | 20PCS/Carton | ||||||
| Carton Size | 430*210*265mm | ||||||
| Weight | 0.87kg/pcs | ||||||
led constant current driver