8 gigabit por POE network switch
support AT standrad(30 watts)
wecome OEM&ODM
SinoV-PSE-8-G-AT is a 8 gigabit port network powered 10/100/1000M self-adapting Ethernet switch. Any of 8 port can be use as UPLINK port to connect to the up level network device, such as common switch and router. It has 8 POE output ports which all match IEEE802.3at standard. Each POE port can offer 30 Watts (max can support 90 watts)power. All ports support Auto MDI/ MDIX function. SinoV-switch-8-G-AT offers a simple, economical,high performance solution, compatible with gigabit networks. It is very easy to install, and to operate and provides flexibility to improve workgroup performances. All the advantages show that this switch is the best choice to improve the sever efficiency. The 8 PSE ports simultaneously offer data transmit channels and supply power for routers, switches, wireless APs, IP phones, industrial network terminals, IP cameras and other equipments. It provides the power supply to these appliances without the necessity of separate power cables, improves the reliability and simplifies the installation of the Ethernet power system. 1 Comply with IEEE802.3 100BASE-T for Ethernet and IEEE802.3u 1000BASE-TX for fast Ethernet standards.2 Compliance IEEE802.3at for POE3 it have 8 ports of half duplex /full duplex self-adapting RJ-45,with gigabit for each ports.8 POE ports,which can automatically identify the power ( 30 watts of each ports,max power as 90 watts of each)4 Each port supports MDI/MDIX, which can automatically adjust the buffer to balance the Ethernet loading and to avoid data package missing. 5 Each port has auto detecting and correcting polarity ability6 Support MAC address auto-learning and auto-aging 7 Panel lamp monitors the working status and helps to resolve faults easily7 Highly insure the data integrality and speed matching9 Highest speed for data transmitting and data filtering10 Strong compatibility in Ethernet application to keep user lowest cost NOTE: Use linear LTC4266 POE chip inside. Full support IEEE802.3 at standard. Support 30 watts /port . max support 90 watts/port.
| General |
| Standards | IEEE802.3 100BASE-T for EthernetIEEE802.3u 1000BASE-TX for fast EthernetIEEE802.3at POE |
| Protocol | CSMA/CD Ethernet |
| Data Transmit Rate | Ethernet:100Mbps(half-duplex)200Mbps(duplex)Fast Ethernet:1000Mbps(half-duplex)2000Mbps(duplex) |
| Topology Structure | Star topology |
| Physical Medium | 10BASE-T:CAT3,4,5 UTP(max. length 100m )EIA/TIA-568 100ohm STP(max. length 100m)100BASE-TX:CAT 5 or up UTP(max. length 100m)EIA/TIA-568 100ohm STP(max length 100m) |
| The number of Port | 8 |
| TX / RX | 8 th |
| LED Display | Power ,UPLINK, Error, ACTIVE |
| Transfer Mode | Storage transmit |
| MAC Address | Auto Study,Auto Update |
| Package Filter Rate | gigabit |
| Package Transmit Rate | gigabit |
| Physical Environment |
| Input | AC Adapter(AC100-240V ~50-60HZ,DC48V/6A) |
| Power | No Load :10W(MAX)Full Load:300W |
| Operating Temperature | -20~70°c |
| Storage Temperature | -40 ~ 70°c |
| Humidity | 5%~95% unfrozen |
| Dimensions | 280*170*44.5mm |
back
