Dual Output Switching Power Supply AC input:85~132VAC or 175~265VAC 2 year quality warranty CE RoHS CCC ISO9001 High Quality

Dual Output Switching Power SupplyAC input.85~132VAC or 175~265VAC2 year quality warrantyCE RoHS CCC ISO9001

ModelSpecification	D-60A		D-60B
	CH1	CH2	CH1	CH2
DC output voltage	5V	12V	5V	24V
Output voltage error (Note2)	±2%	±6%	±2%	±5%
Rated output current	46A	3A	3A	1.8A
Output current rage	0.3-6A	0.2-4A	0.3-6A	0.2-2.2A
Wave and noise(Note3)	75mVp-p	150mVp-p	75mVp-p	150mVp-p
Inlet stability(Note4)	±0.5%	±1%	±0.5%	±0.5%
Load stability(Note5)	±0.5%	±4%	±0.5%	±4%
DC output power	56W		58W
Efficiency	73%		76%
Adjustable range for DC voltage	CH1+10,-5%		CH1+10,-5%
AC input voltage range	85~264VAC 47~63Hz;120-370VDC
Input current	2A/115V 1A/230V
AC impulse current	Cold-start current 30A/115V 60A/230V
Leakage current	<1A/240VAC
Overload protection	105%~150% Type.PULSING HICCUP SHUTDOWN Reset. auto recovery
Over-voltage protection	CH1.5.75~6.73V
High-temperature protection	……
Temperature coefficient	±0.03%°C(0~50°C) ON+5V OUTPUT
Setup rise hold up time	800ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC
Vibration	10~500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage	Input and output interval.3KVAC,Input and enclosure.1.5KVAC,Output and enclosure.0.5KVAC
Isolation resistance	Input and output interval,Input and enclosure,Output and enclosure.0500VAC/100M Ohms
Working temperature and humidity	-10°C~+60°C,20%~90%RH
Store temperature and humidity	-20°C~+85°C,10%~95%RH
Overall dimension	159*97*38mm
Weight	0.55Kgs
Safety standards	Meet UL1012 TUV(En55022) CLASS B, IEC801-2,3,4 IEC555-5
EMC standards	……
Note.1.The testing condition for the parameter above is.230VAC input, rated load,25°C 70%Rh,Humidity2.Error,include the setting error, line stability and load stability.(Note.5)3.Wave test.adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.5.Load stability test.The load is from 0% to 100%,others 60%.6.C2,3,11must be knocked down.

60W Dual Output Switching Power Supply 12V