40W co2 laser power source 1.Be applicable to 40W and 30W laser tube. 2.Fast response speed 3.Both 0-5V analog signal and PWM

40W Power Supply for CO2 Laser Tubes

1. Main Features

1) Good compatibility: It can be applicable to 40W and 30W laser tube.

2) Fast response speed and effect.

3) Dramatically lengthen the life of laser.

4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.

5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.

6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.

7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.

8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.

9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc.

2. Specification

Input	Input Voltage	AC220V or AC110V(to be specified when placing order)
	AC frequency	47—440HZ
	Cold Surge Current	≤60A(AC220V Input)	≤30A(AC110 Input)
	Current Leakage	≤0.7mA(AC220V Input)	≤0.4mA(AC110V Input)
Output	Maximum Input Voltage	DC 25KV
	Maximum Output Current	DC 20mA
Efficiency	≥90percent(full load)
Mean Time Between Failure (MTBF)	≥10000H
Response Speed	≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Control Interface	TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Withstand Voltage	Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell.
Protection	can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell)
Environment	Operating Temperature:-10-40°C),Relative Humidity (RH)≤90percent
Cooling Way	Force-Air Cooling (FAC)
Dimension	L×W×H=167*144*97(mm)

Power Supply, Laser Power Supply, Switch Power Supply, Co2 Laser Power Supply, Laser Welding Power Supply, He-Ne Laser Power Supply, Power Supply for CO2 Laser Tube, Xenon Lamp Power Supply, Power Supply for Xenon Lamp, Power Supply for Solar Box, Power Supply for Xenon Tester, UPS , power switch, DC Uninterruptible Power Supply, High Voltage Power Supply, Switch Power Supply, DC  Converter, YAG Laser Power Supply, Fast Axial Flow Power Supply, AC Stabilizer, source, current source, electric source, power pack, power supply, power source, source of power (supply), power output, source of voltage, supply source, electric power supply,mains. etc.  

If you want to buy this product, please contact with Mr. Xu Kuishan 

Power Supply, Laser Power Supply, Switch Power Supply, Co2 Laser Power Supply, Laser Welding Power Supply, He-Ne Laser Power Supply, Power Supply for CO2 Laser Tube, Xenon Lamp Power Supply, Power Supply for Xenon Lamp, Power Supply for Solar Box, Power Supply for Xenon Tester, UPS ,power switch, DC Uninterruptible Power Supply, High Voltage Power Supply, Switch Power Supply, DC  Converter, YAG Laser Power Supply, Fast Axial Flow Power Supply, AC Stabilizer, source, current source, electric source, power pack, power supply, power source, source of power (supply), power output, source of voltage, supply source, electric power supply,mains. etc.  

If you want to buy this product, please contact with Mr. Xu Kuishan

40W CO2 laser power souce