Ads by Google
It can drive the contact rapidly and directly in certain travel with certain action force in order to switch over the circuitWelding conditions1.Hand solderingUse a soldering iron of 30 watts,controlled at 350ºC approximately 3 seconds while solder applying2.Wave solderingThe peak temperature of the wave oven should be set to 260ºC max.Condition for soldering Temperature ProfileApplicationsThey can operate all types of compute,mouse mobile phones,cameras,VCR,stereo and car radio equipment,PDAs and Home Appliances
| Basic specfication Parameter | ||
| Electrical Characteristics | Rating | DC30V 0.1A |
| Contact Resistance | ≤100m Ω max | |
| Insulation Resistanc | ≥ 100m Ω DC250V | |
| Withstand Voltage | AC500V 1 Minute | |
| Electrical Life | 1,000,000 Cycles above(Load) | |
| Mechanical/Reliability Characteristics | Operating Force Range | 7±0.2 |
| Mechanical Life | 1,000,000 Cycles etc (NO Load) | |
| Operating Temperature Range | -25+ 80 | |
| Ambient Humidity Used | ≤85%RH | |
| Solder Ability | 245 ºC±5ºC 3S ±0.5S | |
| Withstand Soldering Temperature | 260ºC ±5ºC 3S ±0.5S | |
| Material | ||
| Part Name | Material | Remark |
| Cover | Thermoplastic | |
| Base | Themoplastic | |
| Terminal | Brass Alloy | Plating Ag |
| Shrapnel | Beryllium copper | |
| Lever | Stainless Stell | |
| Keystoke | Thermoplastic | |
| Contact | Ag Alloy |