Ads by Google
Switching power supply S-200-5
| Model | S-200-5 | S-200-12 | S-200-15 | S-200-24 |
| DC output voltage | 5V | 12V | 15V | 24V |
| Output voltage rang(Note:2) | ±2% | ±1% | ±1% | ±1% |
| Rated output current | 35A | 16.5A | 13.3A | 8.5A |
| Output current range | 0-35A | 0-16.5A | 0-13.3A | 0-8.5A |
| Wave and noise(Note:3) | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
| Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability(Note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% |
| DC output power | 200W | 200W | 200W | 200W |
| Efficiency | 75% | 80% | 80% | 82% |
| Adjustale range for DC voltage | 4.75-5.5V | 10.8-13.2V | 13.5-16.5V | 21.6-26.4V |
| AC input voltage range | 170~264VAC 47~63Hz 248~370VDC | |||
| Input current | 4.2A/115V 2.2A/230V | |||
| AC Inrush current | Cold-start current 18A/115V 36A/230V | |||
| Leakage current | <0.5mA/240VAC | |||
| Overload protection | 105%~150% Type: pulsing hiccup shutdown Reset: auto recovery | |||
| Over-voltage protection | 115%~135% | |||
| Temperature coefficient | ±0.03%/°c(0~50°c) | |||
| Setup, rise, hold up time | 200ms, 100ms, 20ms | |||
| Vibration | 10-500Hz, 2G 10min,/1cycle, Period for 60min, Each axes | |||
| Withstand voltage | Input and output internal 1.5KVAC, Input and enclosuer 1.5 KVAC, Output and enclosuer 0.5 KVAC | |||
| Working temperature and humidity | -10°c~+60°c, Refer to output derating curve, 20%~90% RH | |||
| Store temperature and humidity | -20°c~+85°c, 10%~95%RH | |||
| Weight | 0.9Kgs | |||
| Satety standards | Meet UL 1012 requirment ( Not apply for the mark) | |||
| EMC standards | Meet FCC PART 15 J Conduction calss A | |||
Note: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25°c 70% RH.Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3.Wave test: adopting "A12" double wire for 20 MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: wht is overload, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100% | ||||