Laser power can be regulated by inputting 0-5V simulation signal or inputting PWM signal.

Adopting zero current half-bridge soft switch circuit, the power supply is featured by high efficiency and rapid response, and easy to match laser tubes of manufacturers. It has simple port control, fits high and low level signals, can control laser start and stop through TTL level, and is equipped with abnormal protection switch to detect if there is water or ventilation outside.Laser power can be regulated by inputting 0-5V simulation signal or inputting PWM signal.The power supply has open circuit protection function: Under the condition of good earthing protection, the power supply can work in open circuit in short time, and then it can avoid the damage caused by laser tube cracking.Ex-factory aging testEach power supply can undergo a 12h aging test at high temperature of 60 Degree centigrade on full load, and 500 times of 7sec power-on/off tests.

Power	Input Voltage	Response Speed	Max Output Current	Starter Voltage	Nominal Power	Output Voltage	Working Voltage	Output Current
40W	220/110	< =1mS	20mA	26KV	300W	26KV	11KV	5-22mA
60W	220/110	< =1mS	25mA	30KV	400W	30KV	16KV	6-24mA
80W	220/110	< =1mS	30mA	35KV	500W	35KV	18KV	7-30mA
100W	220/110	< =1mS	35mA	40KV	600W	40KV	28KV	9-35mA
150W	220/110	< =1mS	40mA	45KV	650W	45KV	32KV	8-38mA

150W laser power supply