1. monel 400 ASTM B127 2.Ni (Min): 63% 3.Ultimate Strength (>= MPa): 600 4.Elongation (>=%): 30 5.Grade: nickel alloy monel 400 nickel alloy plateMonel 400 Chemical composition

Alloy	%	Ni	Cu	Fe	C	Mn	Si	S
Monel400	Min.	63	28
	Max.		34	2.5	0.3	2	0.5	0.024

Monel 400 Physical properties

Density	8.83 g/cm³
Melting point	1300-1390 °C

Monel 400 Alloy minimum mechanical properties in the room temperature

Alloy state	Tensile strengthRm N/mm²	Yield strengthR P0. 2 N/mm²	ElongationA 5 %
Monel400	480	170	35

Monel 400 Corrosion resistanceMonel 400 alloy in the fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: Monel 400 have corrosion resistance in less than 85% consistency of sulfuric acid. Monel 400 is an important material that resistant to hydrofluoric acid. Water corrosion: Monel 400 alloy in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: Monel 400 for the work of the highest temperature at about 600 °C in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: Monel 400 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 °C due to the high nickel.

monel 400 nickel alloy plate