heat-resisting acid-resisting wear-resisting corrosion-resisting high quality low price promet delivery excellent service

Specifications

 Stainless steel :Stainless steel is selected for their wear-resisting, heat-resisting, acid-resisting and corrosion resisting characteristics. Many different grades of stainless are used in wire cloth.T304 is the most common, but other are used in specific applications to take advantage of each grade’s unique properties. The wire mesh made of stainless steel is extensively used in mining , chemical industry, food industry and pharmaceutical industry.

SampleOur stainless steel wire mesh products are generally made of stainless steel Type 302,304,304L,316,316L,321 and 430 etc. We produce wire cloth in all kinds of forms. The weaving is determined according to our customers’ specific requirements, such as the material, the wire diameter, the size of the mesh , width and length.

Standard roll length of stainless steel square wire mesh: 30m to 100'

Plain weave: Dutch weave: woven as a plain weave. Each warp wire and each weft wire

 passes over and under the next adjacent complementary wire, as in normal Plain Weave,

 except the warp wires are larger in diameter than the weft wires. This allows a greater

mesh count in the weft direction.Characteristics: ”zero”—aperture, more solid than square or rectangular mesh, relative

 high open area, suitable for all kinds of filtration. Twill weave: Each weft wire passes over two and under two warp wires, and each warp

wire passes over and under two weft wires. The wire diameter for both(warp and weft)is

mostly the same.Characteristics: square aperture, less rigid than plain weave, especially suitable for

 deforming, strong wire cloth due to ratio of wire diameter and aperture, it is mostly

used for filtration less than 63 μm .Dutch twilled weave: Each warp wire and each weft wire passes over and under the next

two adjacent complementary wires, as in a normal Twill Weave, except the warp wires are

 larger in diameter than the weft wires. This allows a greater mesh count in the weft direction.

This weave pattern enables the weft wires to be woven more densely, and much smaller

aperture sizes can be achieved without forsaking cloth thickness.

Mesh Count inch	Wire Diameter	Mesh Count inch	Wire diameter
1*1	2.5	32*32	0.23
2*2	2.4	36*36	0.23
3*3	2.2	38*38	0.19
4*4	1.63	40*40	0.19
5*5	1.22	50*50	0.152
6*6	0.91	60*60	0.122
8*8	0.91	80*80	0.102
10*10	0.91	100*100	0.081
12*12	0.71	120*120	0.081
14*14	0.46	150*150	0.061
16*16	0.375	160*160	0.061
18*18	0.315	180*180	0.051
20*20	0.315	200*200	0.051
22*22	0.27	250*250	0.041
24*24	0.27	300*300	0.031
26*26	0.27	350*350	0.031
28*28	0.23	400*400	0.025
30*30	0.23	500*500	0.022