Ads by Google
| Product Category | Specification(mm) | Grade | ||
| Heat-resisting Superalloy Anticorrosion Alloy | Hot-rolled Bar | diameter (length of side) | Φ10~85 30~85 | FN-2,RA333, A-286,V-57,Inconel706, Incoloy901,Incoloy903, Incoloy907, HastelloyX,Inconel600, Inconel625,HastelloyC-4, HastelloyB,HastelloyC-276,Inconel718,R26,Nimonic80A,Nimonic90,Nimonic93,Nimonic105,Nimonic118,Rene41,InconelX-750,C263, U720Li,Waspalloy,Hastelloy188,Hayness-25,BAT-45Y,AHB-300,GMR-235D,B-1900,In100,Rene100,In713C,TRW-VIA,In738,X-40,Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625 |
| Forged Bar | diameter (length of side) | Φ90~250 | ||
| Hot-rolled Sheet | thickness×width×length | 5.0~8.0×650~700×1000~2000 | ||
| Cold-rolled Sheet | thickness×width×length | 0.8~4.0×700~1000×400~2000 | ||
| Cold-drawn -Steel | diameter hexagon length of side | Φ8.0~35.0 S 8.0~32.0 | ||
| Forged Shaft | diameter (length of side) | Φ200~450 | ||
| Forged Disc | diameter (length of side) | Φ500~1000×≥100 | ||
| Forged Die Block | length of side mm | 200~500 | ||
| Precision Alloy | Cold-rolled Strip | thickness×width | 0.03~3.0×≤300 | Alloy1,AMS7717B,Alloy 3,Type 2,Alloy 4,Alloy 4,FeCrCo250,AMS5221C,ASTM F15,ASTM F29 |
| Hot-rolled Bar | diameter (length of side) | 21~55 | ||
| Hot-rolled Flat Steel | thickness×width | 3.5~13×≤3008~20×≤450 | ||
| Cold-drawing Wire | diameter (length of side) | 0.1~8.0 | ||
| Corrosion-resisting alloy | wire | Diameter | 0.1-8mm | Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625 |
| pipe | OD×Wall Thickness×Length | 65-200mm×1.5-25mm×1000-9000mm | ||
| plate | Thickness×Width×Length | 3.5-60×100-700*100-3000mm | ||
| bar | Diameter× Length | 10-300mm× 500-5000mm | ||
| Ring | OD×Wall Thickness×Height | 200-1500× 20-300× 25-300mm | ||
Nitronic 60 (UNS S21800, Alloy 218)
UNS | AISI/ASTM |
S21800 | Alloy218 |
Nitronic 60 Chemical composition:
Alloy | % | Ni | Cr | Fe | C | Mn | Si | N | P | S |
Nitronic 50 | Min. | 8 | 16 | 59 | 7 | 3.5 | 0.08 | |||
Max. | 9 | 18 | 66 | 0.1 | 9 | 4.5 | 0.18 | 0.04 | 0.03 |
Nitronic 60 Physical properties
Density | 8.0g/cm3 |
Melting point | 1375°C |
Nitronic 60 Alloy minimum mechanical properties in the room temperature
Alloy status | Tensile strength Rm N/mm² | Yield strength RP0.2 N/mm² | Elongation A5 % | Brinell hardness HB |
Solution treatment | 600 | 320 | 35 | ≤100 |
Nitronic 60 Characteristic Nitronic 60 Stainless Steel provides a significantly lower cost way to fight galling and wear compared with cobalt-bearing and high nickel alloys. Its uniform corrosion resistance is better than type 304 in most media. In Nitronic 60 ,chloride pitting is superior to Type 316.
Yield strength at room temperature is nearly twice that of 304 and 316.
Nitronic 60 provides excellent high temperature oxidation resistance and low-temperature impact resistance.
Nitronic 60 Application field:Used extensively in the Power, Chemical, Petrochemical, Food and Oil & Gas industries with an array of uses including expansion joint wear plates, pump wear rings, bushings, process valve stems, seals and logging equipment.
Nitronic 60 Rod