1.Spherically can make selfalingnment,. 2.Rolling elemtnts linearly come into contact with the raceways of inner and outer ring

1,Dimension

Overall dimension of bearing listed in beaing table accords to ISO015-1981.

2,Angular alignment tolerance

Self-aligning roller bearing is designed in such a way that it is self-aligning.That means that bearing can adjust itself and angular alignment tolerance between outer rings.Under normal load and working condition and inner ring rotates,the unsymmetrical value listed in below table is allowed.Achieving completely specifide value is subject to design and seal type of configured bearing.

3,Tolerance

The self-anligning roller bearing with cylindrical bore or tapered core is of common tolerance level .

4,Internal clearance

 According to the ZWRZ standard,self-aligning roller bearing is of common tolerance level in internal clearance in its radial direction.Almost all bearings can be supplied at C3 clearance,or even higher level C4 clearance.Bearings with dimension less than common level:C2 clearance can also be supplide.Please consult first to check supply status for bearing with non-standard radial clearance (includingC5).These clearance values are used for zero load testing and shaft,which remains uninstalled.

Besides CA type, we can provide CC and MB structure for special clients.

Type	d(mm)	D(mm)	B(mm)	Type	d(mm)	D(mm)	B(mm)
23940	200	280	60	23976	380	520	106
23948	260	360	75	23996	480	650	128
23956	280	380	75	239/500	500	670	128
23960	300	420	90	239/670	670	900	170
23964	320	440	90	239/710	710	950	180
23968	340	460	90	239/850	850	1120	200
23972	360	480	90

ZWRZ big type Self-aligning roller bearing 23960C