Ads by Google
PHNIX split pressurized solar water heater
& This solar water heater is split\separated solar water system, with high working efficiency. It gets CE certificate for the water storage tank, and Solar keymark for the solar collector, which is made of well-known absorber Bluetec eta plus, imported from Germany. Here are square type solar water heater and round cylinder type solar water heater for your choice.
& Of course, this water heater could also work with heat pump, and connect the underfloor heating and radiator,or wood boiler\gas boiler, for complicated system.
Technical data for water tank MODEL PMWT
| Capacity L | 300L | 400L | 500L | 600L |
| Capacity(inner tank) L | 100 | 120 | 150 | 150 |
| Dimension mm | Φ600*1540 | Φ650*1820 | Φ700*1820 | Φ760*1850 |
| Dimension(inner tank) mm | Φ370 | Φ370 | Φ370 | Φ370 |
| Dimension(outer tank) mm | Φ500 | Φ550 | Φ600 | Φ650 |
| Operating pressure bar | 6 | 6 | 6 | 6 |
| Max. testing pressure bar | 12 | 12 | 12 | 12 |
| Max. running temperature °C | 90 | 90 | 90 | 90 |
& You may choose water tanK PMWT for this split solar water heater, if you want to separate clean domestic hot water from underfloor heating hot water. PMWT multi-function water tank gets 2 inner tanks. Otherwise, just choose the standard model PWT please.
PMWT
New arrival: PHNIX split pressurized solar water heater
The high performance of our solar energy water tank complies with norms of Pressure Equipment Directive 97/23/EC(CE certificate no.PCIN080617).
It is made of high quality stainless steel with advanced welding, and formed by high void-free polyurethane foam.
* Various designs
* Remarkably low heat loss
* Non-CFC Polyurethane insulation
* Elegance, good corrosion resistance and long-term durability
* Heat exchangers of Inbuilt coils or out-looped coils for choice
* Couple with boiler, electric heater, heat pump or solar heating system
* Separated tank is especially suitable for water use of houses, hospitals, schools and hotels.
* The anode magnesium bar inside the tank extends the lifespan.
* If the pressure is more than 0.6Mpa, the relief valve will reduce pressure and then water overflows automatically, so that the dirt in the tank can be drained easily.
Manufacturing process of Split pressurized solar water heater
What is PHNIX split pressurized solar water heater ?
Generally, it consists of hot water tank, solar controller and solar collector.
A hot water storage tank (also geyser,hot water tank, thermal storage tank, hot water thermal storage unit, heat storage tank, hot water cylinder) is a water tank, that is used for storing hot water for space heating or domestic use. A heavily insulated tank can retain heat for days. Hot water tanks may have a built-in gas or oil burner system, or electric immersion heaters, or may use an external heat exchanger to heat water from another energy source such as district heating, wood-burning stove, or a district heating system. And our hot water storage tank is wrapped in heat insulation(Non-CFC Polyurethane Foam), which helps much to reduce heat loss and energy consumption.
Water heater tanks can be made of copper, stainless steel, or vitreous enamel-lined carbon steel. And our tanks include a sacrificial anode rod,which protects the tank from perforation caused by corrosion. Such protection is necessary since hot water is very corrosive to carbon steel. In this way, service life is extended.
PHNIX split pressurized solar water heater: cost effective and economical
Solar water heaters lower the cost of electric bills. A typical consumer can save about 30%-50% on his or her electric bill, while lessening the use of oil and the impact on the environment.That is why solar water heaters are so popular. So, never hesitate to choose our solar water tanks!
Certifications of PHNIX split pressurized solar water heater
Attn: Eva
Mobile:0086 15013020219
Skype: helloiameva1