Ads by Google
1. Allocated with the solar energy water heater controller with multiprotection functions such as water temperature, water level display, auto power-off etc.
2. Adopts the efficient heat absorption coating vacuum pipe heat collector.
3. Ultra-strong insulation imported gather ammonia ester high density integral foaming,
4. 55mm super thickness insulation layer, extreme heat loss inside the water tank.No dead angle area inside the water tank
5. Withdraw the cost within 2 or 3 years the product use life is as long as above 15 years.
6. High absorptivity, low emission rate.
7. Energy saving, extremely low use cost at ordinary times.
| Specification | ||
| Commodity | Non-Pressurized Solar Water Heater (TJNP Series) | |
| Material | Inner tank: Steel board with High quality stainless steel(sus304-2b) | |
| Outer tank: Galvanized steel alloy | ||
| Frame: Aluminum alloy plate | ||
| Insulation: Imported polyurethane with 55mm thickness | ||
| Thickness | Inner tank: 0.31-0.35mm | |
| Outer tank:0.31mm | ||
| Frame: 1.2mm | ||
| Insulation: 50mm | ||
| Tube length | Φ47*1500mm~Φ58*1800mm | |
| Volume | 90L~350L | |
| Aperture() | 1.48~5.32 | |
| Pressure | 0.6MPa | |
| Quality Certificate | ISO9001:2000, CE | |
| Warranty | Free repairing for 5 years of any quality problems due to factory default | |
Best/Rgds Ms.Aegean
M.P.:86-15858334605