This product takes full advantages of the diffuse reflection of the pattern to decrease the light reflection, thus has a very high solar transmittance at any angle incidence. Meanwhile, the low iron content of less than 120 ppm enables a very low solar absorbance by the glass itself, and on the contrary increases the transmittance. With the non-toxic chemical composition,low iron patterned solar glass completely conforms to the rigorous environmental requirement of Europe, USA and Japan. it is the ideal encapsulation material for solar panels (PV modules) and the flat solar thermal products.We provide the following two types of the solar glass: Tempered low iron patterned solar glass Annealed low iron patterned solar glassMelting capacity: 300 tons /day (22,000SQM/day)Specifications and performance properties:1. Thickness: 3.2mm—12mm Tolerance: ±0.2mm (3.2mm & 4mm)2. Dimension: Max. 2250mm × 3500mm(annealed) 1219mm ×1930mm(tempered)3. Pattern: Prismatic/matt-finished; matt-finished/matt-finished4. Solar transmittance: (3.2mm polished samples ISO9050/2003)≥91.7%5. Iron content: ≤120ppmFe2O36. Poisson's Ratio: 0.27. Density: 2.5g/cc8. Young's Modulus: 73 GPa9. Tensile Strength: 42MPa10. Hemispherical Emissivity: 0.8411. Expansion Coefficient: 9.03x 10-6/°C12. Softening Point: 720°C13. Annealing Point; 550°C14. Strain Point: 500°CStandards and Certificates:1. JIS B7502/B7512/R31062.ASTM-E-903-96/C1048.043.EN12150/DIN1249D4. GB15763.2-20055.ISO90506.IEC612157.UL17038.SPF/u19.ROHS