Split pressurized solar water heater 1.Environmental protection 2.Highly efficient 3.With stand pressure of 12 bar

Sunny water Split pressurized solar water heater

 The separate pressurized solar water heater composes of solar collector, storage tank, controller, working station and installation parts.

Working principle:

1) When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically

2) The circulation pump makes heat-conducting liquid circulate automatically

3) The heat-conducting liquid transfers heat to water by heat exchanger in the water tank

4) In case the temperature of the water tank does not reach Tmax, then start the auxiliary heating device

5) If discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically

Feature:

1) Collector separates with the storage tank. The tank can be put anywhere of the house

2) And the collector can be put on both tilted roof and flat roof

3) Module design, arbitrary combination, harmony with the building perfectly

4) Intelligent control and automatic operation

5) Anti-freeze: no water inside the tubes when it works

6) The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature

7) Multifunction: Bathing, washing, domestic heating

8) Workable at anytime and enjoyable Outer

Tech info:

200L Split Pressurized Solar Water Heater TECHNICAL DATA
200L WATER STORAGE TANKS	Out tank	High quality Painted steel, Dia. 550mm * H.1340mm
	Inner tank	Food grade SUS304-2B stainless steel, Thickness 1.5mm, Dia.450mm
	Insulation layer	Polyurethane, Thickness 50mm
	Copper coil	Non, single or double. Dia.12mm
20 tubes HEAT PIPE SOLAR COLLECTOR	Manifold	Aluminum alloy casing & copper header pipe
	Vacuum tubes	Single target magnetron sputtering plating(AL/ N/ AL) , 58*1800mm
	Heat pipe	Copper material, Condenser Dia.14mm, Body Dia.8mm
WORKING STATION	SP106 with 8L expansion pump
COMPONENTS	a Electric heater, a Magnesium bar, a P/T valve, a Pressure release valve and Electric control box

Detail Photos: