Welcome to ECOL - Join Free - Sign In
Solar Regulator 10A, 12/24v, Solar Charge Controller, charging battery, PWM, new
Solar Regulator 10A, 12/24v, Solar Charge Controller, charging battery, PWM, new
Supplier Info
[China Supplier]
Contact Person : Ms. Yang Kitty
Tel : 0086-573-82261037
Fax : 0086-573-82509962
Product Detail
It can automatically manage the work of Solar Panel and battery in solar system, which is below 180W(12V) or below 360W(24V).

 

The product can automatically manage the work of Solar Panel and battery in solar system, which is below 180W(12V) or below 360W(24V).

 FUNCTIONS:  1. Over-load protection.2. Short-circuit protection.3. Lightning protection.4. Reverse discharging protection.5. Revers-polarity protection.6.Under-voltage protection.7.Over-charging protection. Attention:  Open the top cover of controller, connect the wire and the terminals of controller according to the drawing on the top cover of controller. 1. Connect“+” and “-” poles of battery with the correct ports on the Controller (the third and fourth wires from the left).* If load indicator("load") flickers once and starts lighting after 30 seconds, you can tell the connection is correct; the following operation can be proceed, otherwise, the following may damage the controller. 2. Connect “+” and “-”poles of solar panels with the correct ports on the controller (the first and second wires from the left).* Incorrect connection may damage controller.3. Connect “+” and “-” poles of load with the correct ports on the controller (the fifth and sixth wires from the left).    Indicator LED:1. The battery is being charged strongly when the charge LED is lighting, flickering means the battery is in floating charge mode, if it's off means charging stopped. 2. When the load LED is lighting, it means there is a output and load can work; if it's off, there isn't output and the load canot work.   Notice:1. Please make sure the rated voltage of solar panels, batteries the loads are same and are all 12Vor all 24V.2. The rated current of solar panels and load must be less than the reted current of controller.     Parameter:

rated voltage

12 or 24V

Voltage of stop power supply

*10.8V or 21.6V

rated charging current

5A/10A/12A/15A

Voltage of resume power supply

*11.8V or 23.6V

Rated loading current

5A/10A/12A/15A

Voltage of stop charge

*14V or 28V

Working temperature

-20°C ~ +60°C

N.W.

120g

Size(L*W*H)/PC

101*95*35mm

Temperature coefficient of voltage stop charge

-3mV/°C/cell

 

          

Solar Regulator 10A, 12/24v, Solar Charge Controller, charging battery, PWM, new

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.