Features:
We adopt the principle of MPPT and advanced Microprocessor Controlled and DSP technology.
Improve PV system output efficiency of 20%-30%.
Wide input DC voltage range.
Digital intelligent control, use light signal transmission to control signal inner system for transfer with protection from interference and power loss.
Solar controller charge module with electric plug, which is more convenience for adding adequate capacity maintaintenance.
Battery charge control adopt three stags eg, equilibrium, boost, and float.
When the temperature is 50°C, system will reach rated output.
High reliability, no need for maintenance, lifetime up to 20 years.
LCD display which shows PV voltage, charge voltage and charge current.
ISO9001:2000.
Electrical specificationsTable 1 Electrical specifications@25°C
Rated Voltage | 12/24 VDC | |
Rated charge current | 40A | |
Load current | 15A | |
Input voltage range | 15-55VDC | |
Max. PV open circuit array voltage | 55VDC | |
Typical idle consumption | At idle < 10mA | |
Overload protection (DC load) | 2.0*Inom>5s 1.5*Inom >20s 1.25*Inom temperature controlled | |
Bulk charge | 14.6V(default) | 29.2V(default) |
Floating charge | 13.4V(default) | 26.8V(default) |
Equalization charge | 14.0V(default) | 28.0V(default) |
Over charge disconnection | 14.8V | 29.6V |
Over charge recovery | 13.6V | 27.2V |
Over discharge disconnection | 10.8 V (default) | 21.6V(default) |
Over discharge reconnection | 12.3V | 24.6V |
Temperature compensation | -13.2mV/°C | -26.4mV/°C |
Lead acid battery settings | Adjustable | |
NiCad battery settings | Adjustable | |
Load control mode | Low Voltage Reconnect (LVR): Adjustable.2. Low Voltage Disconnect (LVD): Automatic disconnection.3. Reconnection: Includes warning flash before disconnect and reconnection. | |
Low voltage reconnect | 12.0-14.0 Vdc | 24.0-28.0 Vdc |
Low voltage disconnect | 10.5-12.5 Vdc | 21.0-25.0 Vdc |
Ambient temperature | 0-40°C(full load) 40-60°C(de-rating) | |
Altitude | Operating 5000 m, Non-Operating 16000 m | |
Protection class | IP21 | |
Battery temperature sensor | BTS - optional remote battery temperature sensor for increased charging precision | |
Terminal size (fine/single wire) | #8 AWG |
Load: 15A DC load.
Battery: 40A-60A rated charge current.
PV: photovoltaic system.
Solar MPPT charge controller