solar charge controller Epsolar MPPT 12/24/36/48V solar charger with LCD CAN, LAN, RS232/485 Communication

Model:

ET3415N 

Rated continuous charging current 30A

Max. PV input power 1560W

12V/24V/36V/48V system voltage auto work

 

ET4415N

Rated continuous charging current 45A

Max. PV input power 2340W

12V/24V/36V/48V system voltage auto work

 

ET6415N

Rated continuous charging current 60A

Max. PV input power 3120W

12V/24V/36V/48V system voltage auto work

 eTracer series                     Network MPPT solar charge controller

 

eTracer is an advanced Maximum Power Point Tracking(MPPT) controller for off grid photovoltaic(PV)systems up to 3KW.The controller features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point in all the weather condition. The controller provides higher efficiency up to 98% with lower power loss. Include up to 450 days data logging by connecting to Ethernet.

 

Features:

12/24/36/48V auto work

Advanced MPPT technology

Several seconds tracking speed

High Tracking efficiency of 99%

Multiphase synchronous rectification technology

Peak conversion efficiency of 98%

DSP&ARM processors architecture ensures high speed and performance

Multifunction LCD displays system data and status

Three kinds of communication ports:RS232,CAN BUS and Ethernet

Three stages charging optimizes battery performance

Software updated by users

 

Electronic protection:

PV Array Short Circuit

Over charging

PV over current

PV over voltage

PV reverse polarity

Battery reverse polarity

Overheating protection

Electrical parameters	ET3415N	ET4415N	ET6415N
Nominal System Voltage	12/24/36/48V auto work
Rated Battery Current	30A	45A	60A
Max PV open circuit voltage	150V
Voltage range	9-64V
Max PV input power	12V 390W	12V 585W	12V 780W
	24V 780W	24V 1170W	24V 1560W
	36V 1170W	36V 1755W	36V 2340W
	48V 1560W	48V 2340W	48V 3120W
Self-consumption	1.4-2.2W
Communication	RS232,CAN BUS and Ethernet
Grounding	Negative