CuNi2Be—C17510 (CDA 1751) Nickel Beryllium Copper is the mirror image of alloys C17500 in terms of its properties & Characteristics. C17510 is also primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a Nickel alloying addition (1.40-2.20%). C17510 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively.
Typical Application for CuCo1Ni1Be - Cobalt Nickel Beryllium Copper Alloys
Electrical: Fuse Clips, Switch Parts, Relay parts, ConnectorsIndustrial: Spot Welding Electrodes, Electrode holders and Seam Welding discs in Resistance Welding, Plunger Tips in Aluminum Die Casting Machines, Injection Nozzles, Cooling Pins in Plastic Injection Machines, Mulds for Casting of Non-Ferrous Materials, Tooling for Plastic Moulds ,Butt Welding Jaws, Contact Tips for Submerged-Arc-Welding
Available Sizes:Custom Diameter & Sizes, Random Mill lengths
Available Products (forms):Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, SheetsCustom shapes are available upon request.
Chemical Composition:
Be: 0.40-0.70%Co: 0.80-1.30%Ni: 0.80-1.30%Cu: BalanceNote: Copper plus additions equal 99.5% minimum.
Typical Physical Properties:Density (g/cm3): 8.83Density before age hardening (g/cm3): 8.75Elastic Modulus (kg/mm2 (103)): 14.10Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6Thermal Conductivity: 209 W/m • oK at 20 CMelting Range (°C): 1000-1070
Note: 1). the units are based upon Metric.2). the typical physical properties apply to age hardened products.
International Specification:
Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3Sheets: ASTM B534Wires: ASTM B441Plates: ASTM B534, SAE J461,463; RWMA Class 3
European Standards: CuCo1Ni1Be, DIN 2.1285; CW103C to EN
Note: ASTM: American Society for Testing and Materials SAE: Society of Automotive Engineers AMS: Aerospace Materials Specification (Published by SAE) RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to ASTM.
Mechanical Properties:The Mechanical Properties will be available on request from customers.
Most Commonly Temper Used:
Rods/Bars: A(TB00),H(TD04),AT(TF00),HT(TH04)Sheets: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04),AT(TF00)Wires: A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04)Plates: AT(TF00),HT(TH04)
CuCo1Ni1Be-CW103C Cobalt Nickel Copper Beryllium