Explosion-proof Vibration Sensor 1.4-20mA signal output 2.24VDC power supply 3.Range:0-10/20/30/40mm/s 4.thread mount

KH-HZDintegrative vibration transmitter, vibration sensor integrating the traditional vibration sensorand the accuracy measuring circuit together, not only achieve “sensor +transmitter” mode vibration measurement system function, but also achieve economic but high accuracy vibration measure system. The transmitter can connect directly with PLC, DCS or other systems. Mounted on the bearing cover of rotating machines, the transmitter is an ideal choice for steam turbine, compressors, motors, blower, fans, water pump etc to measure vibration speed or vibration amplitude. Because its output signals are caused by moving coils cutting magnetic force line, so its power supply can be 24VDC, easy installation and maintenance.

Application: The transmitter can be used widely in heating and power plant, cement plant, machine plant, blower plant, paper made plant, coal mine machine etc.

1. Specification

Sensitivity: 20mv/mm/s±5% 30mv/mm/s±5% 50mv/mm/s±5%

Frequency Response: 5-100Hz (10-300Hz)

Measuring Range

1).0-10mm/s 0-20mm/s 0-30.0mm/s 0-40.0mm/s 0-50.0mm/s

2).0-100um 0-200um 0-300um 0-400um 0-500um

Signal Output: standard current 4-20mA (default when order)

Output Impedance: ≤500 Powersupply: DC24V

Max acceleration: 10g MeasurementDirection: vertical or horizontal

Mounting method: vertical or horizontal mounted on the measured vibrating point

Mounting thread: B type: M10X1.5, F type: M20X1.5

Working Ambient:Temperature: -30°C to 50°C, Relative humidity≤90%

Size and Weight: B type: φ45×90mm,about 350g F type: φ70x115mm,about750g

KH-HZD-F:Intelligent Explosion-proof Vibration Sensor