Chemical formula: In2O3/SnO2 = 95/5wt%Main Usage: ITO target material used in evaporation, evaporation

ITO powder and ITO target material are made up of the mixture of In2o3 and Sno2, which is an important raw material of making ITO thin films. Due to its transparency to visible light and good electrical conductivity, ITO thin films are widely used in liquid crystal display glass, curtain wall glass, and the anti-fog windshields in aircrafts and cars. Main quality standards of ITO target materials: Chemical composition: In2o3:Sno2=90:10(wt %) In2O3/SnO2 = 95/5wt%Purity≥99.99% Relative density: High density~99.9% Low density62% Density uniform deviation≤±0.3%

At the same time we can provide high purity metal targets above 4N-7N, such as gallium, arsenic, phosphorus, tin, tellurium, antimony, titanium, bismuth, selenium, zinc and cadmium.

We provide non-ferrous alloys of titanium, nickel, molybdenum, tantalum, zirconium, hafnium, chromium, tungsten, niobium and other materials.We also provide the deep processing of rare metals of tungsten, molybdenum, tantalum, niobium, zirconium, titanium, nickel and the molybdenum wire, molybdenum boat, tungsten crucible, molybdenum crucible, molybdenum and molybdenum alloy rods.

Chemical formula: In2O3/SnO2 = 95/5wt%Main Usage: ITO target material used in evaporation, evaporation Preparation of ITO conductive glass and flexible ITO conductive film.Physical and chemical propertiesRelative density: 99.9%Purity: ≥ 99.99%Dimensions: Diameter :24.60-25.20 mmThickness: 9.80-10.20mm Appearance: taupe circular block, cylinder-shaped, granular (2-4mm ,4-6mm ,6-10mm ,10-15mm)Packaging: polyethylene film vacuum packaging

Contact:Eric Chai

Email:[email protected]

Tel:+86-0755 83692784

High-density ITO target material