1)Gross cut capacity 2800mm 2)Max width 1250mm 3)Tilling saw blade 90 degree 4)Main motor 4kw 5)Saw blade diameter 300mm MJ6128Yprecise panel sawMain Technical Parameter:

Dimensions  of sliding table	2800×310mm
Gross cut capacity	2800mm
Width of cut between saw blade and rip fence	1250mm
Saw blade φ	300mm(φ250-φ350)
Height of cut φ300mm	70mm
Speed of main saw blade	4000/6000rpm
Spindle diameter	30mm
Tilling saw blade	90°
Main motor	4kw
Scoring saw blade	120mm
Speed of scoring saw blade	8000r/min
Spindle of scoring saw	20mm
Scoring motor	0.75kw
Net weight	850kg
Gross weight (wooden packing case)	900kg
Overall dimensions	2800×2550×900mm

 Function Characteristics:

Apply to processing all kinds of density boards, shaving boards, wooden-based panels, ABS panels, PVC panels, organic glass plates and solid wood and others with wood structure and similar hardness. Movable table guide track is plating chromium steel bars structure, exact and durable.  Made of high-strength extruded aluminum alloy, movable table is high in strength and won’t bend.With oxidation treatment, movable table surface is beautiful and hardness.

 Installation and Adjustment:

   1)Machine could be fixed on hard or special ground , adjust and make the machine even ,to keep the precision .

   2)After the fixing of the machine , adjust the fixed-worktable and active worktable to make them be connected to the machine the machine by screws. This will keep the height between the fixed-worktable and active worktable (the active worktable should be a little higher than the fixed-worktable ). Then adjust the depth of parallelism between the active worktable and the main saw web ,adjust the depth of parallelism between the portrait slipper guide and the main saw ,adjust the perpendicularity between the portrait slipper guide and the main saw .All this adjustment could keep the machine works at the required precision

   3)The lineation saw had been well adjusted before the sale ,it is only need to have a little adjustment if there is some error.  If you want to make a big adjustment to the        hei ght of the saw web , of course that it should not exceed the max lift (4mm), you should adjust the belt according .ly.. The installation of the adjustment was fixed at the electromotor bosun’s chair ,you should lock it after the adjustment .

   4)All the above specifications had been well adjusted before the sale ,and you can only check it ,if there are some error ,you must let professional people adjust ,and normally it is no need to adjust again after the adjustment.

MJ6128Y Precision pushing bench saw