1) 300 MHz MIPS Processor 2) Linux Operating System; OLED - Display 3) Tuner: DVB-S, optional: DVB-C, DVB-T

DM800C HD Digital Satellite Receiver

1) 300 MHz MIPS Processor2) Linux Operating System3) OLED - Display4) MPEG-2 / H.264 Hardware decoding5) Tuner: DVB-S, optional: DVB-C, DVB-T6) Tuner Module, Plug&Play7) 1 x Smartcard-Reader8) V.24/RS232 Interface9) 10/100Mbit Ethernet Interface10) 1 x Scart (RGB, FBAS or S-Video)11) DVI12) 2 x USB 2.013) Analog modem14) S/PDIF Interface for digital bit stream out (AC-3)15) 64 MByte Flash, 256 MByte RAM16) SATA   - for use either as internal SATA HDD 2,5   - or to use for extern eSATA17) Unlimited channel lists for TV/Radio18) Channel-change time < 1 second19) Automatic service scan20) Directly bouquet-lists21) EPG (electronic program guide)22) Multiple LNB-Switching control (supports DiSEqC)23) OSD in many languages and skin-support24) Videotext Decoder25) Extern 12V power supply

Technical Data

DBS-Tuner mit DVB-S2:Frequency Range  950 .... 2150 MHzDemodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPCDVB-S2: 10 31 Mbaud/s (8PSK) , 10 30 Mbaud/s (QPSK)

Video decoder:Video Compression MPEG-2 and MPEG-1 compatible, H.246Video Formats 4:3 / 16:9Letterbox for 4:3 TV-Device

Audio decoder:Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3Audio Mode Dual (main/sub), Stereo

Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:Output Level L/R 0,5 Vss on 600 OhmTHD > 60 dB (1 kHz)Crosstalk < -65 dB

Output digital:Output Level 0,5 Vss on 75 OhmSampled Data Filtering 32 kHz, 44.1 kHz, 48 kHzS/PDIF-Output optical, Toslink

Ausgang Video:Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:Input Level FBAS 1 Vss +/- 0.3 dB on 75 OhmTeletext filter in conformity with ETS 300 472 Standard

TV-Scart:Output: FBAS, RGB, S-VideoSerielle Interface RS 232:Typ RS232 bidirectionalBitrate 115,2 kBit/s max.Plug Connector SUB-D-9Function: Update of Firmware

Ethernet:10/100 MBit compatible interfaceFunction: Update of Firmware

Analoge modem:analoge modem for Internet connection

SATA Interface:   - for use either as internal HDD 2,5 or eSATAor internal 2,5" HDD

USB2 x USB 2.0 Host

LNB power and polarisation per tuner:LNB Current 500mA max.; short-circuit-protectedLNB Voltage vertical < 14V no load, > 11,5V at 400mALNB Voltage horizontal < 20V no load, > 17,3V at 400mA

Count of active satellite position:DiSEqC 1.0/1.2 SAT POSITION / SAT OPTIONDiSEqC - Rotor Control

Power consumption:< 15W at 12V

External PSUInput:110-240V AC / 50-60Hz / 0,6AOutput:12V = / 3,0A

Physical specification:Ambient Temperature +15°C...+35°CHumidity < 80%