Description:
This series of sand machine is suitable for soft, medium hard and hard material for crushing and shaping. It is widely used in various ore, cement, refractory, aluminum soil clinker, carborundum, glass raw materials, mechanism building sand and fine grinding all kinds of metallurgy waste residue. Especially for hard, very hard and resistant to abrasion resistance material of silicon carbide, carborundum, sintered bauxite, beautiful sand, ect. Which have higher efficiency than any other type of crusher
Features:
1. Simple structure
2. Low operation cost.
3. The principle of stone hit stone make low wear.
4. High crushing ratio, save energy
5. Has the function of fine and coarse grinding
6. Low noise
7. Less dust pollution
8. Suitable for crushing medium hard and ultrahard materials.
9. Easy maintenance
Working principle:
We also called the principle “stone hit stone”. When materials into the crusher through feeder hopper, it is being separated into two parts by glassware. Some materials get into the impeller and speed-up in it. Under the high speed of centrifugal force, this material was shot out and falling down, then crushing repeatedly, such a piece of material in the vortex crushing cavity bear many probability impact, friction and grinding crushing. At last forming multiple closed cycle, then reach the required product size by sieving equipment.
Technical parameters:
Model | Max. feed size (mm) | Motor power | Impeller speed | Capacity | Overall dimensions | Weight (include motor ) |
(KW) | (r/min) | (t/h) | (mm) | (T) | ||
PCL600 | 35 | 37~55 | 2000~3000 | 12~30 | 2500×1620×2600 | 5.6 |
PCL750 | 45 | 55~75 | 1500~2500 | 25~55 | 2700×1760×2800 | 7.6 |
PCL900 | 50 | 110-150 | 1000~1700 | 55~100 | 3900×2000×3070 | 12.6 |
PCL1050 | 60 | 150~180 | 1000-1700 | 100~160 | 4600×2350×3450 | 17.3 |
PCL1250 | 60 | 264~320 | 850~1450 | 160~300 | 4500×2400×3700 | 22.5 |
PCL1350 | 60 | 320~440 | 800~1193 | 200~360 | 5200×2700×3800 | 27.6 |
Note: This Technical parameters is just for reference.