Ads by Google
This Curing Press is appliable for curing PCR & LTR tyres with Nitrogen or steam as curing medium.This Curing Press is a Mechanical type, the beam moves vertically and horizontally for tyre loading and unloading. The center mechanism is BOM type and the curing mould is heated by PLATEN. Other features: Dual-Column Vertical Chuck Loader, Dual-Cylinder Unloading Device, Pro-Bar Style Mould Stripping Unit. As per customer's request, Auto-Adjusting Device, SMO Drive Device, PCI and Singel-, Double- or Triple-position Green Tyre Holder are available. Curing Piple can also be made into order. This Curing Press uses PLC for real-time control, and industrial PC for Human-Machine Operation Interface.All parameters can be re-set during Curing Cycle, and real-time data collection/preservation,alarming,as well as data back dating can also be realized through this system. With ethernet interface,Curing Press group-management is available.
Brief Technical Parameters:
| 1 | Type of Cured Tire | PCR & LTR Tire | |
| 2 | Heating Type | Platen | |
| 3 | Number of Mould | 1 | |
| 4 | Type of Center Mechanism | BOM | |
| 5 | I.D. of Mould Shield | 1350mm | |
| 6 | Max. Mould closing force | 1380kN | |
| 7 | Height of Mould | 420-480mm | |
| 8 | Max Mould Weight | 3000kgs | |
| 9 | Diameter of Bead | 15-20 | |
| 10 | Max. Height of Green Tire | 450mm | |
| 11 | Max. OD of Cured Tire | Two-piece Mold | 950mm |
| Segmental Mold | 900mm | ||
| 12 | Max.Section Width of Cured Tire | 350mm | |
| 13 | Designed Mould Open/Close time | 18s | |
| 14 | Max Load of VCL | 60kgs | |
| 15 | Max External Pressure | 1.4Mpa | |
| 16 | Max.Internal Pressure | 2.8Mpa | |
| 17 | Hydraulic Water Pressure | 1.8-2.1Mpa | |
| 18 | Compressed Air Pressure | 0.7Mpa | |
| 19 | Control Air Pressure | 0.25-0.35Mpa | |
* Our Curing Press range is from 42" to 105".
Tyre Shaping and Curing Press- 55" Mechanical type