A. Large cooling area guarantees high yield rate; B. Prefessional security system guarantee your safe operation;

main characters of Xinda 6 ton waste tire pyrolysis recycling machine

1.  Environmental Protective

A.     Waste gas: Transferred through two safety device: water close &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of patent in our company Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of CE.

B.    Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless waste water was introduced to evaporator(use the heat of the flue of main processor as its heating resource)

C.     Waste solid. The solid residua will be left after the catalyst splitting from waste tire, they are carbon black and steel wire, carbon black is  used in many industries such as electric cable jacketing, rubber additive, steel wires can be re-sell to wire factory.

2.   Security

The main equipment is of high safety. The phase of the uniquefizable waste gas produced during the process is alkyl from C1to C4, which is dangerous when burning directly. In our process, it is transferred first through a water close device and a safety device- burning air muzzle. Before burning, we should ensure the safety of production.

3,   High output:

There are 57 pipes in our vertical condenser; the diameter of each pipe is 30mm, the length is 1500mm and the cooling area is 13m². We offer 3 condensers for XD-6 machinery, the total cooling area is about 40 m².

Horizontal condenser also has 57 pipes, the cooling area equals to 5 vertical condensers. If you want 8 tons plant, we can ofer you 1 horizontal condenser and 1 vertical condenser.

About 70% of the heavy oil is cooled and separated after the high temperature oil-gas going through condenser pipe and the oil –water separator, the rest of 30% of light oil is cooled after going through the second grade and third condensers. Thus the oil output increase.

Technical  Parameters of our equipments

	Items	Contents
1	Equipment type	XD-1-06	XD-1-08	XD-1-10
2	Raw material	tires/Plastic/rubber	tires/Plastic/rubbrt	tires/Plastic/rubber
3	Structural form	Horizontal rotation	Horizontal rotation	Horizontal rotation
4	24-hour Capacity	6 ton	8 ton	10 ton
5	Oil yield	2.7~3 ton	3.6~4 ton	4.5~5 ton
6	Operating pressure	Normal	Normal	Normal
7	Material of Reactor	Q345R	Q345R	Q345R
8	Thickness of Reactor	14mm	14mm	14mm
9	Rotate speed of Reactor	0.8turn/minute	0.8turn/minute	0.8turn/minute
10	Total power	12KW	12KW	12KW
11	Mode of cooling	Water cooling	Water cooling	Water cooling
12	Cooling area of condenser	40sqm	40sqm	65sqm
14	Kind of transmission	Internal gear drive	Internal gear drive	Internal gear drive
16	Noise dB(A)	≤85	≤85	≤85
17	Size of Reactor(D×L)	2000×6000	2200×6000	2600×6600
18	Working form	Intermittent operation	Intermittent operation	Intermittent operation
19	Delivery time	20days	20days	20days
20	Weight	18~25T	20~25T	25~30T

 Over look of our factory: