High pressure Hose crimping machine/hose press machine manual crimping machine manual hydraulic hose crimping machine : QTD-M51
Features of manual crimping machine
1 import components, low noise long life.
2 the quantity expansion, suitable for different elbow Crimp;
3 has mistakenly put mold protection device;
4 the whole disassembling mold, fast and convenient
How to Crimp the Ends on a Hydraulic Hose?
1 Insert one end of a length of hydraulic hose into the hydraulic hose fitting. Make sure it is securely in place.
2 Set the micrometer on the hose-crimping machine according to manufacturer specifications for the kind of hose and fitting you are using. Find these specifications in the hose-crimping machine's manual.
3 Place the fitting end of the hose into the crimping machine and line up the fittings mark on the machine with the top of the hose.
4 Insert the compression ring into the crimping machine.
5 Activate the hose-crimping machine. The crimping machine's press will exert pressure on the compression ring, causing the compression mechanism to press against the hydraulic hose fitting and crimp it in place.
The technical parameter of manual crimping machine
Item | Specification |
Crimping range | 6mm-51mm |
Rated preeure | 31.5mpa |
The largest crimping pressure | 500T |
Rular precision | 0.02mm |
Dimension | 0.45m3 |
Weight | 350kg |
Dies | 10 dies |
manual hydraulic hose crimping machine With 10 dies:
16mm,20mm,23mm,27mm,31mm, 36mm, 41mm,47mm,53mm,63mM
The photo of manual hydraulic hose crimping machine
The details of manual crimping machine
New manual crimping machine :6mm-64mm
The dies of the manual crimping machine QTD--51
manual crimping machine Packing like this :
The Dies of manual crimping machine Packing like this