Flexible rubber thermal Insulation tube, Length 1.83m, Temp. Range -50 to 110 C, Black, I.D. 6 to 89mm, thickness 6 to 30mm

Flexible rubber thermal Insulation tube, Length 1.83m, Temp. Range -50 to 110 C,  Black, I.D. 6 to 89mm, thickness 6 to 30mm 

 

 Description:

HengBao Insulation Tube is a flexible, closed cell and light weight elastomeric material designed for insulating liquid cooling and heating lines. It is available in I.D. 6 to 89mm, thickness 6 to 30mm. 

Raw materials: NBR/PVC

Lightweight and flexible

Low thermal conductivity value

High water vapor resistance factor

No health hazards

Easy to clean without deterioration

Density: 40 to 80 kg/m3

Length: 1800 to 2000mm

Thickness: 6 to 30mm

Inner diameter: 6 to 89mm  

 

 

1. It is an elastomeric rubber based insulation material in the form of sheet and pipe with closed cell structure which doesn’t contain CFC halogen materials (chlorine, bromine, etc.) and PVC. It is manufactured to be used for air conditioning, heating and cooling systems.It has high thermal insulation value. It can be faced with aluminium foil and can be self-adhesive.

2. Application:

It is a black coloured elastomeric rubber based insulation material in the form of sheet and pipe with closed cell structure It is used on the exterior surfaces of the ducts and large diameter pipe lines in the heating, cooling and air conditioning systems for thermal insulation and condensation control purposes. It is developed to use at battleships, merchant ships, transportation systems; in areas where there are crowds of people such as business and entertainment places, hospitals, airports in order to reduce the emissions of smoke and poisonous gases. The sheets are adhered to the duct surface by using a special adhesive that Hengbao suggested. For the pipe applications, the pipe to be insulated and the rubber surface should fit properly and no gap should be left in between. Joints should be tightly sealed and they should be covered with insulation tape afterwards if necessary. Taping should not result in thickness loss. The application should be protected against distruption and rupture.

Flexible Rubber Thermal Insulation tube 1.83m