Test voltage: 500V~10KV Range 400 G Ohm Auto-calculate PI & DAR Short-circuit current: 5 mA LCD,RS232

Application:

 IM 515B Digital Insulation Tester can be used to measure insulation resistance, DAR(R60s/ R15s), PI(R10min/ R1min),Both Lab and site,Ok  

Product Features:

-Test voltage:0.5KV-10KV, variable continuously

-Bigger output current, short-circuit current more that 5mA

-Automatic calculation PI ( Polarization index)& DAR( Dielectric Absorption Ratio),auto save R15s,R60s,R120sand R10min for analysis

-Simple connection, one HV cable, another one signal wire

-Measurement range up to400 GW.

-High anti-interference ability, can be used at high voltage sub-station

-Automatic discharge after test finished. Operator can observe discharge process

-LCD display,RS232 interface

 

 Technical Specifications:

- Test voltage:, 0.5KV-10KV, variable continuously; Accuracy:5%+-10V

 -Range:0.1M-400GW,Accuracy:+-(10%+5dig)

 -Short-circuit current more that 5mA

 -Test Duration: 1 minute-10 minutes upon different measure mode

 -Charging power: 180-270Vac,50/60Hz. Powered by the Grid or generator

 -Working temperature: -10-40°C,

 -RH20-80%

 -Battery duration: 6-12 hours for full battery without backing light

-Size:320X280X130mm

-Weight:4kg

 

Order Information

Item                   Art. No.

IM515B

m Instrument              1 piece

m Test Wires               1 set

About Battery:

Model IM515B is designed based on Lead-acid rechargeable battery, 12V,4.5A. its size is 9.9 cm L,8.9 cm W and 6.9cm H.

If you world like the instrument to be delivered by air, then the battery is forbidden to be transported. So two ways for your choice.

m By air delivery, however customer buy the battery at his country. Although Lithium battery with small size, also OK

m By sea delivery battery together.

 

 

IM515B High voltage 10KV Insulation Tester