Aerial amplifier / Repeater / Booster, China Suppliers and Manufacturers

Aerial amplifier / Repeater / Booster

Supplier Info

Shenzhen Huaptec Co., Ltd.

[China Supplier]

Contact Person : Mr. Wang Wang

Tel : 86-755-29921605

Fax : 86-755-29921165

Product Detail

Antenna Booster, Repeater Wireless repeater, booster Mobile Signal Booster, repeater Cellular Booster, repeater Name: F10F Single System10dBm power / 60dB Gain10~100 square metersRepeater kit available1. Very cost effective solution for immediate coverage2. 1 year warranty after delivery3. Wide band consumer booster 4. ETSI & 3GPP & 3GPP2 standards5. Support any cellular devices (voice & data & video) 6. SOHO solution for small sized areas7. Power LED for power status 8. Universal power range of 90V~265V9. Palm size elegant design and low power consumptionDescription

There are millions of very small areas (10~100 square meters) where people work or live in and suffer from very poor or no mobile signals. People are seeking a cheap and immediate solution that would allow them have clear phone calls or higher speed broad band. However most of the current repeater solutions usually have larger coverage size, and not cost effective.

F10F is specifically designed as a "CHEAP" solution to meet this request.

1. It supports any one system of CDMA800, GSM900, DCS, PCS, CDMA2000 or WCDMA.

2. It is quite elegant metal design and can be held in palm, the size is only 112*79*17mm.

3. The power consumption is only 4W.

4. Standard F10F is supplied as a kit, including a donor antenna, a 10 meter long cable and a whip antenna.

Specification:

Electrical specification		Uplink	Downlink
Frequency Range	CDMA800	824 ~ 849 MHz	869 ~ 894 MHz
	CDMA1900	1850 ~ 1910 MHz	1930 ~ 1990 MHz
	GSM850	824 ~ 849 MHz	869 ~ 894 MHz
	GSM900 & EGSM	880 ~ 915 MHz	925 ~ 960 MHz
	DCS	1710 ~ 1785 MHz	1805 ~ 1880 MHz
	PCS	1850 ~ 1910 MHz	1930 ~ 1990 MHz
	WCDMA	1920 ~ 1980 MHz	2110 ~ 2170 MHz
	AWS	1710 ~ 1755 MHz	2110 ~ 2155 MHz
Max .Gain		≥ 55dB	≥ 60dB
Max .Output Power		≥ 5dBm	≥ 10dBm
Band width (-3dB)		Wide Band
Noise Figure		≤ 6dB
VSWR		≤ 2.0
Group Delay		≤ 1.5μs
Frequency stability		≤ 0.01ppm
Spurious Emission &Output inter-modulation		GSM Meet ETSI TS 151 026 V 6.1.0
		WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
		CDMA Meet IS95 & CDMA2000
WCDMA System	Spurious Emission Mask	Meet 3GPP TS 25.143 ( V 6.2.0 )
	Modulation Accuracy	≤ 12.5%
	Peak Code Domain Error	≤ -35dB@Spreading Factor 256
CDMA System	Rho	ρ > 0.980
	ACPR	Meet IS95 & CDMA2000
LED Alarm		Standard
Power LED		Power Indicator
Mechanical Specifications		Standard
I /O Port		SMA-Female
Impedance		50 ohm
Operating Temperature		-25ºC~+55ºC
Environment Conditions		IP40
Dimensions		112x79x17mm
Weight		≤ 0.5Kg
Power Supply		Input AC90~264V,output 7.5 / 0.8A

Aerial amplifier / Repeater / Booster