Wireless receiver 1.Memory function 2.AC220V 3.4ch with case 4. stay at previous before the power shut

Model No.: DL-CS4012LM

Description: Memory function Wireless receiver

1. Product Detail:

DL-CS4012LM is a 4CH RF Wireless Remote Control Switch, it is widely used in electrical operated gate and window, motor, blind, light/ lamp, video signal and so on. It features high quality, reliable performance and low power consumption. About 100m/300ft control range. Besides, this device has the function of memory, that if the power is cut off, it will return automatically to the previous status when the power is restored.

2. Technical specification:

 

	Description	Value
1	Supply Voltage	220VAC
2	Static Current	=< 6mA
3	Frequency	433 MHz
4	Sensitivity	>= -105 dB
5	Output voltage	Optional DC / AC
6	Operating Temperature	-40 to 80 deg C
7	Decode IC	MCU(decode fixed code & learning code)
8	Dimension (w, h, d)	7.2cm, 5.2cm, 2.6cm
9	Weight (with housing)	180g

3. Procedure to Learn and Erase Codes

    a)  Keep pressing the learn button until the led blink and extinguish, which indicates previous learned codes have been erased.

    b)  After erasing the code, the led will flash slowly, press the “Learn” button on the receiver board when the led is off, keep pressing until the led is on, then release, indicating the receiver is ready and waiting to learn from transmitter.

    c)  Press the remote, the led will blink, that means the code has been learnt..

4. Operating details:

Output Mode selection.

	J2	J1	Output Mode
i	Short	Open	Momentary
ii	Short	Short	Toggle
iii	Open	Open	Interlock
iv	Open	Short	ChA, ChB: Momentary ChC, ChD: Toggle

 

5. Wiring diagram: 

6. Packing: 

DL-CS4012LM Memory function Wireless receiver