Ads by Google
A Brief Duplicator User's Guide
A.NORMAL COPY
1.please turn on the power and press the 5th key once------remote copy2.press the 1st key once----------input 1 key3.begin to input the client's 1st key(press the key until the frequencydisplayed )------- ISN data4.press the 5th key once-------input 1 key again5.input the client's1st key again--------ISN data 6.press the 5th key once------input 2 key7.input the client's 2nd key------ISN data8.press the 5th key once--------input 3 key9.input the client's 3rd key------ISN data10.The rest deduced ,having finished the inputting process, press the 5th keytwice -----useNO. ''x'' remote11.having inserted No. ''x'' remote, press the 5th key twice------write ok12.pull out the remote, press the duplicator 4th key---------FREQ MHz13.put the copied remote on the duplicator, press any key once-----appearingfrequency14.put the new remote on the duplicator, use ceramic aligner tool to turnroundwhite capacitance until the digital reach the copied remote15.having finished the adjustment, press the 1st and 2rd once at the sametime .the light flash once, then press any key ,the light -light-,over
B.SINGKEY COPY
1.turn on the power, press the 5th key twice-----normal copy2.press the 3rd once-------single key copy3.press the 5th once------input 1 key4.input the 1st key once------input 1key 0035.input the 1st key the 2nd time ------input 1key 0136.input the 1st key the 3rd time-------input 1key 0237.go on inputting until--------input 2key 0138.input the 2nd key once-----input 2key 0239.all key inputted, press the duplicator 5th key twice-----use no ''x'' remote10.the other steps like the ''normal copy''
C.Reread/recopy(SCP)
this function is used to recopy the having copied remote1.turn on the power ,press the 5th key once ------remote copy2.press the 2nd key once------inline remote3.insert the client's having copied remote,press the 5th key once-----writeto remot4.pull out the client's remote, press the 5th key once------input NO.''X''remote5.insert the new blank No''x'' remote,press the 5th key twice-----write ok6.pull out the new remote,begin to adjust the frequency,like the ''normalcopy''7.press the 1st and 2nd key of the new remote at the same time ,then pressany keythe light light,ok ,over.
D.No.3 remote copy(rolling code series)
1.turn on the power, input all key of the client's remote, like the ''normalcopy''2.Notice : some of the client's remotes are two keys, even one key, you mustinput fivekey(any key is ok)3.after you finish inputting, press the 5th key twice ,the duplicator beginto scan, if the decode scanning is successful,---------completely copy; iffailed ,the scanning can't be stopped ,or the duplicatordisplay-------input 1key4.if display(completely copy),press the 5th key twice-----input No.3remote5.insert the new blank remote(No.3),press the 4th key(+1),then press the5th key------write ok6.pull out the new copied remote , begin to adjust the frequency, like the''normal copy''7.if the new copied remote is 5 key, please press it's 5th key; if theremote 5 keys, press the 1st and 2nd key once at the same time, then pressany key ,the lightlights.end
Notice: Please inter copy with the client's old remote ,or it can't be used
Remote control duplicator