Ads by Google
Production Name: silver flame retardant reflective tape
Item No:DM1901
Color: silver
Specification: 100CM width Can be die – cutting band-cut and guillotined
Fabric backing: 70% aramid fiber 30% Polyester
Retroreflective Performance
The coefficient of retroreflection (RA, in cd/lux/m2) of DM®Reflective Material is measured by methods based on either of the following retroreflective intensity testing procedures:
Production Name | Day Color | Initial average (RA ) | Minimum (RA ) | ||
| silver | 450 cd/lux.m | 330 cd/lux.m |
The RA values listed in the following tables were measured at +5.0° entrance and 0.2° observation angles.
TUV Certification and Report
Physical Performance
| Physical Performance | Test Method | Approved Products |
| Abrasion RA≥100 | EN530:1995 Method 2 5000 Cycle | Listed Under Product Certification-ANSI/ISEA 107-2010 9.4.1 |
| Flexing RA≥100 | ISO 7854:1997 Method A 7500 Cycles | Listed Under Product Certification -ANSI/ISEA 107-2010 9.4.2 |
| Cold Fold RA≥100 | ISO 4675:1990 -20°C(-4°F) | Listed Under Product Certification -ANSI/ISEA 107-2010 9.4.3 |
| Temperature Circle RA≥100 | 12 Hours 50°C(122°F) 12 Hours -30°C(-22°F) | Listed Under Product Certification -ANSI/ISEA 107-2010 9.4.4 |
| Wash RA≥100 | ISO 6330:2000 Method 2A 50°C(122°F) Number of cycles Listed | Listed Under Product Certification -ANSI/ISEA 107-2010 |
| Dry-Clean RA≥100 | ISO 3175:2000 Method 9.1 Number of cycles Listed | Listed Under Product Certification -ANSI/ISEA 107-2010 |
| Wet Reflectivity RA≥100 | ANSI/ISEA 107-2010 9.4.6 Appendix A | Listed Under Product Certification -ANSI/ISEA 107-2010 |
| Flame Spread | EN11612 4” Char length | Listed Under Product Certification - EN11612 |
| Heat Resistance | EN11612 260°C(500°F) | Listed Under Product Certification - EN11612 |
| Convective Heat RA≥100 | 10Mins 140°C(285°F) | Listed Under Product Certification - EN11612 |
Inspection before shipment
1) Brightness testing
testing angle choice
Observation angles(o.A): 0.2° 0.33° 1° 1.5°
Entrance angle(E.A): 5° / 20° /30° /40°
2) Washing Circle/Dry circle/ Washing shrinkage testing
| Production Name | Washing Circle | Dry Circle |
| DM1901 silver Flame retardant reflective tape | 25 | 5 |
Performance
While use of DMReflective Material enhances visibility, no reflective material can guarantee absolute visibility, particularly in adverse weather conditions. Performance will vary depending upon actual use, exposure conditions and maintenance. Customers should be aware that DM reflective material product portfolio that offers a range of product attributes and users should test the reflective material on their finished garments to satisfy conformance to their own requirements.
Application Instructions
Whenever two or more pieces of DM Reflective Material – Fabrics are used together on a single surface or as a set, they should be matched to ensure uniform daytime color and nighttime reflectivity. All high visibility safety garments should be constructed in accordance with the appropriate standard(s).
Cutting – Die-cutting is recommended, although it can also be hand-cut or guillotined.
Sewing – For the best results, sew in place using a lockstitch and with no more than 12 stitches per inch (2.54 cm), and not less than 5/64" (2 mm) from the edge of the reflective fabric. For best results,
Screen Printing – Images may be printed on the surface of Scotchlite reflective material – fabrics. All inks should be continuously tested to ensure acceptable adhesion in the event of changes occurring in the manufacturing process or composition of the ink. Prior to printing,
Wiping the surface with a soft cloth lightly dampened with isopropyl alcohol may help ink adhesion. Printed areas will not be retro reflective.
Handling Precautions
Most DM reflective material – fabrics contain an aluminum layer as part of their construction. Blemishing of this aluminum layer can occur if the front surface of the product has direct contact from hands during application and is then exposed to hot and humid conditions, greater than 26.7 °C (80 °F) and greater than 70% relative humidity, for a period of weeks. These blemishes do not affect performance of the product.
Care and Maintenance Instructions
Important: Test each application according to appropriate care instructions required for the finished product. Actual life of DM Reflective Material depends on cleaning methods and wear conditions.
1.Home laundering means using a top or front loading consumer type home washing machine with a consumer detergent at moderate water
temperatures (up to 60 °C , 140 °F). Garment finishing such as tumble drying at high temperatures can limit garment life and should be considered as part of the cleaning
2.Fabrics may be home washed. Dry-cleaning may also be used for certain products. If bleach is needed, only non-chlorine bleach should be used. High alkaline treatments such as stain removal products should not be used.
Product Availability
DM reflective material – fabrics are available in rolls with the following standard width and lengths:
Production Number | Roll Width | Width Tolerance | Standard roll length | Addition information |
DM1901 | 100CM | + -0.3MM | 100M | MOQ 1000M |
Important Notify
Storage and Shelf Life
Store in a cool, dry area and use within two years after date of receipt. Store rolls in original shipping cartons. Return partially used rolls to the carton or suspend horizontally through the core. Cut pieces should be stored flat.
WARRANTY
If any DM reflective material does not conform to this warranty, then the sole and exclusive remedy is, at DM’s option, replacement of the DM product or refund of the purchase price.
PRODUCT USE
1. Customer is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
2. Customer is solely responsible for determining the proper amount and placement of the product. While reflective products enhance visibility, no reflective product can ensure visibility or safety under all possible conditions.