1.The Equipment is mainly used for square winding power lithium-ion batteries. 2.Equipment capacity: 2-5 pcs / min

Square power lithium-ion battery semi-automatic winding machine

A.     Equipment name and model

Device Name: Square power lithium-ion battery semi- automatic winding machine

Model: BM-SPW-10

B.    The Equipment uses

The Equipment is mainly used for square winding power lithium-ion batteries.

The process is as follows: positive, negative electrode by manually import, membrane active unwinding by dust processing, winding into the part of batteries in accordance with its winding process requirements for winding, automatic conversion station, automatically attached tape and automatically terminate under the material to complete the winding batteries.

The Equipment according to the different size batteries, lithium-ion batteries power the square made of semi-automatic winding mechanism series products, the product series also includes models for the BM-SPW-10, BM-SPW-20, BM-SPW-30, BM-SPW-40 four models of equipment.

Equipment specifications to adapt the batteries:

Model	Battery thickness	Battery width	Battery length
BM-SPW-10	6-12mm	50-80mm	70-130mm
BM-SPW-20	6-12mm	40-80mm	100-160mm
BM-SPW-30	6-12mm	40-80mm	150-230mm
BM-SPW-40	6-12mm	40-80mm	150-260mm

B.  Equipment characteristic and parameter

Vice winding station single sided drive volume control pin, roll the width of the needle can be a combination of micro-adjustment;Imported into positive and negative electrode by manual work, auto winding, auto-work spaces, and automatic tape automatic termination under the posted material;Diaphragm is divided into upper and lower two-volume automatic unwinding, tension adjustable, and the membrane using heat welding cold-cut way of soldered and cut;Electrode into parts of the dust removal device;Batteries winding process allows the diaphragm or negative film outsourcing ending two;Roll pin combined width :35-75mm, customized according to customer requirements;Diaphragm fit width :70-260mm;Electrode to adapt to the width :68-258mm;Electrode to adapt to the length :300-1500mm;Termination Tape Width :10-50mm;Winding precision: the diaphragm and the cathode, anode and cathode alignment errors are less than between 0.7mm; Equipment capacity: 2-5 pcs / min.

Model	BM-SPW-10
Roll pin combined width	35-75mm, customized according to customer requirements;
Diaphragm fit width	70-260mm;
Electrode to adapt to the width	68-258mm;
Termination Tape Width	10-50mm;
Winding precision	the diaphragm and the cathode, anode and cathode alignment errors are less than between 0.7mm;
Equipment capacity	2-5 pcs / min.