Ads by Google
100mA x-ray machine for radiology medical model SF100BY
I. General Description
Type SF100BY mobile diagnostic X ray machine with section combined X-ray tube head, full-wave rectification, is suitable for all kinds of hospitals making x ray and photographing,
especially for injure dept. of orthopedics, operating room and household ward.
II. Advantages
This efficiency-improved x ray machine takes the following advantages:
1. Adopts high-pressure silicon, full-wave rectification technology.
2. With kilovolt (kV), milliampere (mA) and time (s ) three factors interlocks control system
3. Overloading indicator & the protection circuit of excessive voltage & insufficient voltage, thus the X-ray tube head of x ray will not be damaged because of mis-operating.
4. Equipped with steady filament voltage circuit to control the X ray dosage while photographing
5. Remotely controlled exposure & manually controlled exposure options
6. Sound & flash indicator while exposing for patients & medical personnel convenience
7. This machine equipped the dynamoelectric cluster limiter with shadow positioning. The dynamoelectriccluster limiter will send out a beam of visual light while operating to aim the nidus and the scale ofthe visual light overlaps the scale of X ray exposing. This function make it convenient that medical personnel position the nidus & the x ray exposed area.
8. This machine has a movable cantilever sliding in vertical direction so that it is flexible to
adjust the Xray tube head to appropriate angle & height. When the complete machine is moved, the cantilever of the X-ray tube head can be set to the minimum position and lock, safely and conveniently.
9. The gross weight of the complete machine is150 kilograms, width is 72 centimeters, high is
200 centimeters and length is 118. centimeters. It can be used to moved in the ward and between beds conveniently.
III. Main Technical Conditions
1. This machine
is a single focus point, full-wave rectification bedside X-ray medical diagnosis equipment with a combined X-ray tube head.
2. Maximum Ratings:
mA kVp s
kV S | ~3.2 | ~4.0 | ~6.3 |
16 | 90 | 90 | 90 |
32 | 90 | 90 | 90 |
63 | 90 | 90 |
|
100 | 80 |
|
|
3. Condition of the power supply
Single-phase alternating current
Voltage: 180V-250V
Frequency: 50Hz
Power supply resistance ≤0.2Ω
Instantaneous electric current: 37A (Max)
4. Timer 0.08-6.3s, 20 shelves of electron type
5. X-ray tube specification : XD4-29/100, focus 4.3
6.X-ray tube focus highest position (above ground level)≥1710mm
X-ray tube focus lowest position (above ground level)≤480mm
7.Remotely exposure distance: 6m
8. The required pulling force to move the whole machine≤250N (25kg)
9. Weight of the complete machine: 150kg
10. Power of Electric Beam Limiting Device: AC 24V, Capacity 110W.
11.Indicator Power of Electric Beam Limiting Device: AC 24V, Power: 100W, Tungsten Haloid Light
12. Illuminance of Electric Beam Limiting Device: no less than 100Lx at 1000mm from X-ray focus to target area
13. When X-ray focus at 650mm away from the film, max illumination scale ≤350mm×350mm;
When X-ray focus at 1000mm away from the film, max illumination scale ≤50mm×50mm
IV. Packing details
| Gross weight | 250kg |
| N.W. | 150kg |
| Packing dimension | 150cm*80cm*150cm,1.8CBM |
Strong Plywood Case
V. Warranty
12 months from the date of shipment
Technical support forever
Other Models
50mA mobile x ray machine; 70mA mobile x ray machine;
100mA stationary x ray; 200mA stationary x ray (have stock); 300mA stationary x ray
100mA x-ray machine for radiology medical model SF100BY