Ads by Google
Overview:
MPEG-2 IP encoder is an easy to use, powerful MPEG-2 encoder. Support video and audio signals with a variety of standard. Compressed data output format is ASI. Compression matter is MPEG-2MP@ML. The encoder makes audio and video signals in real-time encoding and re-use and generate DVB transport stream. It is in full compliance with MPEG-2 standard with a strong compatibility. Its volume is IU computer case. It can completely off-line set and run by the front panel LCD display.
Features:
. Support MPEG-2MP@ML (4:2:0) coding;
. Support SDI video and audio input;
. Start fast;
. Support all hardware IP output;
. High-fidelity audio processing R/L channel, stereo input;
. Output bit rate continuously adjustable, flexible and easy to use;
. Rich input-output interface to achieve freedom of access;
. SDT insertion;
. Local and remote control of network management;
. LCD display, easy and flexible operation;
. High reliability design, stable operation.
Technical Specification:
Input | Video signal | LEV 1.0Vp-p,CVBS |
Audio signal | LEV 2Vp-p | |
Output | ASI | DVB standard,BNC |
IP out | 188 bytes TS packet in UDP payload | |
protocol | Unicast and multicast | |
Code rate | 1.0~15Mbps continuously adjustable | |
Control | NMS(Ethernet Port,RJ-45), Keyboard+LCD | |
Video Coding | In compliance withISO11162(MPEG-1)&ISO13818 (MPEG-2) | |
MPEG-2 coding adopt MP@ML(4:2:0) | ||
MPEG-2 Adaptive Field Frame (AFF) | ||
MPEG-2 field based (FB) | ||
audio coding | sampling | 32KHz,44.1KHz,48KHz |
code rate | 64,128,192,256,384Kbps | |
property | MPEG-1 1/2layer,DVD quality | |
Support one-channel stereo or dual-channel | ||
Resolution | standard | Compliance with CCIR601support1/2D1,2/3D1,3/4D1 |
PAL | 720*576,704*576,640*576,544*576,480*576,384*576,352*576 | |
NTSC | 720*480,704*480,640*480,544*480,480*480,384*480,352*480 | |
General Features | Size | 44mm*482 mm*240mm |
Environment | 0~45(Operating);-20~80(Storage) | |
Power | 220VAC±10%,50Hz,25W | |
Network management software can set and control all the encoder parameters from PC in local network or internet
NMS menu (picture )
Connect encoder to PC via RJ 45 cable
1 Click” add freq node” to build a frequency node
2 Then click” add device” to add a device. Here please select “encoder”
3. Name the equipment and input IP address (default is 192.168.0.110), then click” ok”
4. After connection, you can set all parameter in software the same as front panel settings
related products:
| MPEG-2 1-channel encoder(AV in and ASI out) | SC-1101 |
| MPEG-2 4IN1 encoder(4 AV in and ASI out) | SC-1102 |
| MPEG-2 5IN1 encoder(4 AV + ASI in and ASI out) | SC-1103 |
| MPEG-2 Encoder(AV+YCbCr in and ASI out) | SC-1112 |
| MPEG-2 Encoder(AV+SDI in and ASI out) | SC-1122 |
| MPEG-2 IP Encoder(AV in and ASI+IP/UDP out) | SC-1114 |
| MPEG-2 IP Encoder(SDI+AV in and ASI+IP/UDP out) | SC-1104 |
| MPEG-2 IP Encoder(SDI+AV in and ASI+IP/RTP out) | SC-1124 |
| MPEG-2 4IN1 IP encoder(4AV in,ASI+IP/MPTS/Multicast/unicast out) | SC-1108 |
| MPEG-2 4Channel IP encoder(4AV in,4UDP/SPTS/Multicast out) | SC-1110 |
We will supply you the best quality, good price and short delivery time. Your kindly enquiry will be highly appreciated.