Rotary selector switch Rated current: 20A~160A Position: 1pole~12pole

CA10 Rotary switch

Introduction

       CA10 series control and load switches offer a solution for most cam switch operations. Different types can be used as control switches, switches to be installed in equipments and switches for motor control according to IEC60947-3. This range offers current capacity from 20A ~160A.

Working condition

1. Recommended ambient temperature -5oC~42oC

2. Installation altitude: ≤ 2000m

3. Relative atmosphere humidity do not exceed 50% when the highest temperature is +40°C. At lower temperature, higher humidity can be allowed. For example, humidity can reach 90% when temperature is 20°C. Special measures should be taken when the congealed dew appears on the surface caused by the change of temperature.

Classification

1. Classified by utilization, control and load switch.

    Motor switch            Control switch

2. Classified by operation limited movement

   Spring return    Limited movement with spring return

3. Classified by contact system switch with limited movement

    has 1~12 poles (63A only have 8 poles)

    Switch with spring return has 1~3 poles

    Motor control switch has 1~6poles

4. Classified by rotation angle: 30o, 45o , 60o, 90o, etc

5. Classified by panel

    Square panel, rectangular panel, circular panel (only 20A)

6. Classified by handle

    R type, I type, F type, B type, S type, L type, P type, K type

Mounting dimension

Classified by operation method and position of handle

Parameter