1.Material: AISI304, AISI316L 2.Capacity:1.5-60T/H 3.Pump head:14m-60m 4.Max lift:70m(KS),50m(BS) 5.Motor:centrifugal pump

Application:

The  centrifugal pump is your solution to a lower cost of ownership while providing the flexibility your operations need. Its stainless steel construction provides the durability, integrity, and absolute quality required for your sanitary fluid transfer operations.

Standard Design:

Centrifugal pumps primarily consist of a stationary pump casing and an impeller mounted on a rotating shaft. The pump casing provides a pressure boundary for the pump and contains channels to properly direct the suction and discharge flow. The pump casing has suction and discharge ports for the main flow path of the pump and normally has small drain and vent fittings to remove gases trapped in the pump casing or to drain the pump casing for maintenance.The series meets the most stringent sanitary standards for being CIP-able and SIP-able.

Shaft Seals:

The AVH pump is equipped with either an external single shaft seal or a flushed shaft seal. The stationary seal rings are made up of acid resistant steel AISI 316L and silicon-carbide. The rotary seal rings are in graphite. The pump also can be equipped with a double mechanical shaft seal.

 

Technical Parameter:

 

Maximum flow: 150 m³/hMaximum discharge head: 70mMaximum revolution: 3600 rpmTemperature range: -4 ° F to 248 ° F (-20 ° C to 120 ° C)Noise level (at 1m): 60-85 dB (A)

Design Features:

 

Stainless steel constructionAdjustable stainless steel legsDesigned according to 3A sanitary standardIEC B34 motors, IP55, F-class insulation, 50Hz or 60Hz.

 

Materials:

 

Product wetted--SS 304/316Gaskets: EPDMMechanical seal: SIC/SIC/EPDMInside surface treatment: Ra 32µinOutside surface treatment: Sandblasted or mirror surface

 

options

 

Mechanical seal: C/SIC, TC/TCGasket: FPM (Viton), NBREnd connection: Tri-clamp, threaded, flange, 3A, DIN, SMS, RJT, I

Stainless steel sanitary centrifugal pump