scr urea solution pump 1)Continuous working with low temperature 2)Max flow:30~50LPM 3)Pressure max: 40PSI

SCR UREA SOLUTION-ADBLUE PUMP 

 

Adblue /urea pumps SPECIFICATION

PUMP Design:   5 chamber diaphragm

Motor Design:   Permanent magnet DC/AC

Voltages:       12, 24VDC,115/230VAC

    

Pump Body:     Aluminium

Diaphragm: Viton

Check valves: Viton

Max. Flow Rate:   30~50LPM

Max. Pressure:   40PSI (2.75BAR)

Liquid Temp:     40°F (5°C)MIN;  

140°F (60°C)MAX

Duty cycle:     Continuous work with self-ventilated

Weight:        5.5KG for DC pump  6.5KG for AC pump

Certifications: CE

Port Size inlet/ outlet: 3/4”  1''

Adblue Pump For Urea SolutionTechonical data:

Model	Volts	Open Flow	Pressure	Amps	Speed	N.W / G.W
	DC /AC	LPM	Shut Off	(A)	(RPM)	(KGS)
HV-30A	12 VDC	30-35	40 psi (2.8 bar)	15	2800	5 /5.5
HV-30B	24 VDC	30-35	40 psi (2.8 bar)	7.5	2800	5/5.5
HV-30S	115 VAC	30	40 psi (2.8bar)	4	3400	6 / 6.5
HV-30M	230 VAC	30	40 psi (2.8bar)	1.5	2900	6 / 6.5
HV-40S	115 VAC	40	40 psi (2.8bar)	4.2	3400	6 / 6.5
HV-40M	230 VAC	40	40 psi (2.8bar)	1.8	2900	6 / 6.5
HV-50S	115 VAC	50	40 psi (2.8bar)	4.5	3400	6 / 6.5
HV-50M	230 VAC	50	40 psi(2.8bar)	2	2900	6 / 6.5

Permanent magnet and continuous dutyBuilt-in pressure switch automatically starts and stopsPump when faucets is opened Self-priming 3m so pump can be located above water tank Runs dry for extended periods of time without damageHold excellent motor keep stable temperature of pump body

 DC MOUNTING

  

The HV Series pumps are self-priming and may be located above or below the water supply in a dry location. To vertically mount these units, it is best to do so with the motor on top. This will prevent water dripping on the motor in the event of a leak. Place pump on a solid surface and secure with four mounting screws; be careful not to compress the rubber grommets, which act as vibration dampers.

AC assembled