1.4/3-C Heavy Duty Slurry Pump 2.High efficiency 3.Easy installation and maintenance 4.ISO9001-2008

RH4/3-C Series Heavy Duty Slurry Pump

Shijiazhuang Ruite Pump Co., Ltd  supplying a precision range of pumps including slurry pump (horizontal and vertical) chemical pump (desulfurization pump), water pump, and all kinds of pumps parts.                                                                                                      

With more than 20 years’ experience in manufacturing and service, now we exported the pumps to Eastern Europe, Africa, and Asia.They all sales well for their durability and energy-saving property.

Introduction:                                               

 AH Series slurry pump is mainly using for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. 

MODEL DESCRIPTION OF THE SLURRY PUMP

RH-4/3C

4-inlet diamater(inch)

3-outlet diameter(inch)

RH-slurry pump

C-Tray

This kind of slurry pump can be used in the following situations:

-  Mining & Minerals Processing-  Chemical Process-  Flue Gas Desulphurisation-  Sugar Processing-  Sand & Gravel-  Oil & Gas Exploration-  Industrial Application  

This kind of slurry pump has the following benefits:

Bearing assembly – the slurry pump has a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners – the slurry pump has easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

Means of transmission

The series slurry pump may adopt means of transmission including direct connection DC,belt drive(CR,CL,CV,ZV), hydraulic and frequency control etc

our pump parts are interchangeable with horizontal M,L,AH,HH and vertical SP lines. So if you are operating Warman pumps you have an immediate opportunity to save them money on spare parts.

 

 

 

 

 

 

RH4/3-C Series Heavy Duty Slurry Pump