4 sets Have in stock; Manufactured according to latest API Standard; same as BOMCO,HH,EMSCO Pump, Long work life than5 year

          Reciprocating triplex single-acting piston mud pump  F -1300 (API)

F-1300 Mud Pump Technical Agreement

(buyer  Party  A)

(supplier Party B)

After the negotiation of the two parties, the mud pump made by B should meet the following technical requirements.

1.F-1300 mud pump must be made in American System.

The Capacity of airbag in the F-1000 mud pump is 75 Liter, Maximum working pressure are 35Mpa, the pressure of charging is 3~5Mpa,there is no air pressure when pump leave the factory for the Manufacturer has already released the pressure.

2.  The gear wheel uses the Herringbone Gears.

3.The main technical parameters of F-1300 mud pump.

4. Input power 1300 horse-power (960KW)

5.Stroke305mm

6.Rated impulse number 120 Times / min

7.The maximum pump pressure 35Mpa

8. Minimum flow (Ø140) 28.15L/S

9.Maximum flow (Ø180)   46.53L/S

10.Static Pressure Tested with valve box is 68.3Mpa

11. Height of Shaft center 1616mm

12.Valve chamber specifications API 6#

13.Extended part of the outer gear shaft  Diameter×Length Ø215.9mm×344mm

14.Diameter tolerance Ø215.9  0-0.046

15.Intake    12 ”Flange(305mm)

16.Discharge outlet 5 1/8” Flange

17.Drive ratio 4.23 : 1

18.Dimensions    4876mm×2413mm×2095mm(After assembly)

19.Total weight about 25.808ton(Remove the Airbag,Bend,Filter)

             About 26ton ((After assembly)

20. Driving shaft is integral with shaft gear.

21. Base width: 1850

Model	F-1300
Max. input power (kw)	1300(969)
Rated speed spm	120
Max. liner bore in.(mm)	7(177.8)
Stroke in. (mm)	12(304.8)
Cylinder hydraulic test pressure  psi(kg/cm2)	7500 (527)
Gear ratio	4.31:1
Suction pipe dia. in.	12
Discharge pipe dia. in.	5
Valve	API 7
Weight (excl. belt wheel) (kg)	45,650 (20,707)
size	4876mm×2413mm×2095mm

  

  

  

 

 

Advantage

1. Use first-class steel manufacturing, can ensure the steady running.

2. Lower work noise<802. Excellent performance, can keep on working more than 5 years when in a ggeneral conditions.

3. Three times QC process, we can ensure 100% are work normally when arrive your hands.

------------------------------------------------------------------------------------------------------------------------------

Cost-effective

As the price compete, many company would use poor materials, such as poor seals, low quality square parts,use Casting instead of forging to drop the cost. So please never compare the price only. for us, we always insist high quality first, we hope can do long-term business with you, So we always use better materials to ensure the high quality, be honest and Fine workmanship always to customers and do long term business.

F1300 Mud Pump, First-Class Quantity,Buyer From USA Drill Co,Warehouse Supply