Ads by Google
Properties | PTFE CGM 16F |
Appearance | White powder |
Tensile Strength | min. 30.0 MPa |
Elongation at Break | min. 300 % |
Moisture Content | max. 0.04% |
Bulk Density | 340 –450 g/l |
Average Particle Size | 20 ~ 70 µm |
Standard Specific Gravity | 2.13-2.19 |
Shrinkage | max. 4.5% |
Typical applications: compounds of PTFE powder with fillers.Safety precautions:1.Toxic gases will be produced when the material is heated above 260. Ventilation system must be provided in sintering areas.2.Sintering temperature should be below 400? to avoid decomposing.
Introduction