rapid testing,China rapid testing Manufacturers, Suppliers

2.5" TFT CCTV Installation mate

Feb 09, 2012

Best system equipment for installing and inspecting engineering. Built-in Li battery; video-in terminal and power supply. Palm s Features/Specifications :Best system equipment for installing and inspecting engineering. Built-in Li battery; video-in terminal and power supply. Palm size, easy to carry and operate.Through power out enables user to inspect; correct camera or confirm installation. It' ...

Supplier: Shenzhen Fortune Joint Technology Co., Ltd.

[China Manufacturers]

USB2.0 fullspeed16 channels LA1016 Logic Analyzer 100M USB2.0,CPLD,FPGA

Jul 02, 2012

USB 2.0 full-speed 16 channels Logic Analyzer 100MHz Sample rate and 33MHz Measuring Bandwidth SWLA1016 USB 2.0 full-speed 16 channels Logic Analyzer100MHz Sample rate and 33MHz Measuring Bandwidth Signal Sampling Rate: 100MHz (max)Hardware Filtering: 2 levelsReal-time Displaying Rate: 100MHz (max)Dynamic Data Recording: SupportedMeasuring Bandwidth: 33MHzStorage Depth per Channel: 32KbitsInput ...

Supplier: Shenzhen Sunwin E-Commerce Co., Ltd.

[China Manufacturers]

Test equipment for auto repair

Aug 02, 2012

The EUS-1001 repair tester is designed to perform repair tests for different type of Electronic Unit Injectors (EUI) and Electro Design FeaturesOne cambox for all major EUI/EUP models with correspondingadapter and camshaftCambox mounting height 125mm (from the center of camshaft to bench mounting platform) for Bosch type pump test benchController is designed for three kinds of drive mode:1. Low ...

Supplier: Injectronix Co., Ltd.

[China Manufacturers]

H pump measurement and control instruments

Mar 01, 2013

H pump measurement and control instrument--independent research and development H pump measurement and control instrumentFeatures:1.self-research technology2.detection of high precise sensor3.multi-gear and two-way control of motors4.technology support from profetional training Fuctions: Through the electronic H pump control variable pre-stroke control during operation in the diesel engine to ...

Supplier: Taian North Test Equipment Factory

[China Manufacturers]

Brake Pad Set for MAZDA/DAEWOO OE 04492-87705

Apr 12, 2012

Auto brake pad 1 Safety on the road 2 Quiet and clean 3 Rotor Friendly 4 Reliability and durability 1: Environment friendly & rotor friendly2: Extra ordinary performance equal to OE standard3: Short stopping distance without increasing rotor wear.4: Exceptional stopping power under even high temperature & extreme operating condition..5: Effectively stable braking.6: Longer life means lower cost.7 ...

Supplier: Ningbo Rapid Automotive Co., Ltd.

[China Manufacturers]

Auto Electric Fuel Pump test bench

Aug 08, 2012

Auto Electric Fuel Pump test bench Auto Electric Fuel Pump test benchAuto Electric Fuel pump test bench, it can test the Comprehensive performance of variety of automotive electric fuel pump assembly.Such as Voltage, oil flow, oil pressure.It can be adjusted:1. Simulation of oil pressure at various conditions of vehicle fuel pump.2. The simulation of fuel supply at various conditions of vehicle ...

Supplier: Taian Nantai Experimental Equipment Co., Ltd.

[China Manufacturers]

SIDE SLIP TESTER

Nov 11, 2012

This side slip tester is to test errors of car's wheels and avoid danger from driving. SL-300 Side Slip Tester Max.Loading Weight:3000kgDisplay:LED or MechanicalWidth of wheels: 800-1880mmDimension of square plate: 850*500mmIndicator scale: IN.OUT(0-10m/km)Alarm Device: IN.OUT(5m/m-Electric Bell Red Light)Power source:110/220VTotal size(Mechanical):3150*570*130Total size(LED):2610*570*130Weight( ...

Supplier: Fuzhou Chiarng Lurn Precision Machine Co., Ltd.

[China Manufacturers]

Stainless steel ice bucket/cooler

Jul 03, 2012

Stainless steel ice bucket/cooler Direct manufactures Time delivery Reasonable price Stainless steel ice bucket/coolerFeatureGood for promotionused in bar.hotelProduct description Item No:TMS 001Size:dia.18*20.3cmMaterial:stainless steel+plasticPacking:1pc/opp 8pcs/ctn(43*40*47cm)G/N W:10/8kgsLogo:customizedSample time:5 workdaysDelivery time:30 days after receiving 30% deposit Stainless steel ...

Supplier: Tomore Plastic And Hardware Products Co., Ltd.

[China Manufacturers]

chemical composition of fabric

Aug 12, 2012

Thickness:0.9-0.096mm.absorbency:824ml/m2 chemical composition of fabric with web poreTechnical data sheetP/N:YPL-8230TP-DPS TESTSUNITSPECIFICATIONComposition100%100%PolyesterGrammageg/m2230±5Thicknessmm0.93±0.03AbsorbencyCapacityml/m2≥824AbsorbencyRatesec≤1APC(Air Particle Count)≥0.3μm(counts/pcs/cfm )____LPC(Liquid Particle Count)≥0.5μm(counts/cm2) Remarks:Wiper LPC Procedure (YICL-WI-QA-004) ...

Supplier: Kingclean Technology Co., Ltd.

[China Manufacturers]

HX675Hydraulic pressure generator

Feb 10, 2012

HX675 pressure generator with 1600bar pressure range and 0.05%FS stability Detailed information:Product Description HX675 Manual pressure generator consists of hand pump, pressure-regulation valve, micro-adjusting valve,relieve valve and output interface. Fine stainless steel used for gauge with strong rust prevention, high sealed performance, stable compression and easy operation. It can ...

Supplier: Huaxin Instrument (Beijing) Co., Ltd.

[China Manufacturers]

Refrigerant Gas Identifier

Jul 11, 2012

1.Quickly&automatically determines the weight concentrations of R12, R134a, R22, hydrocarbons and air. 2.Easy&profitable to use Features:Refrigerant Identifier delivers the features and benefits today’s professional A/C technicians want.Its ergonomic design and exceptionally portable design make it easy and profitable to use. Capabilities:Utilizes dispersive infrared (NDIR) technology to ...

Supplier: Guangzhou Haifei Auto Products Co., Ltd.

[China Manufacturers]

MANUAL PRESSURE GENERATORS

Sep 08, 2012

Manufacturer of tire nursing tool,refrigeration tool,auto beauty and maintenance tool,auto tool,table cabinet ..... Body in anodized aluminium ,inner parts in stainless steel and brass Buna N gaskets.Maximum pressure :15barFixed connection for plastic pipes 6×4mmSensitivity:0.5mm water columnDischarge valve with fine controllerUseful volume per pump stroke :10cm3 MANUAL PRESSURE GENERATORS

Supplier: Zhejiang Heshi Auto Tool Co., Ltd.

[China Manufacturers]

Pressure manometer

Feb 07, 2013

Pressure manometer Pressure manometer Pressure manometer

Supplier: Ningbo Sinppa Air Tools Factory

[China Manufacturers]

Test Manifold

Aug 07, 2012

test manifold manufactured by Sanyi is a matched assembly for hydraulic test and is a necessary equipment to achieve control of Main Technical DatumWorking Pressure: 105MPaWorking Medium: Water & oilWorking Temp: -29°C ~ 121°CNominal Bore: Φ25mmConnection Type: UnionMaterial Class: EEProduct Specification Level: PSL 3 Test Manifold

Supplier: Nantong Handing International Trading Co., Ltd.

[China Manufacturers]

Aluminium Interior Roller Shutter Door

Oct 24, 2012

1,CE,TUV,RoHS,CB 2,Surface Treating Powder Coating 3,Storm and Hurricane protection,Anti-theft 4,Material :aluminum alloy Product structure (1) End Cap (2) Bearing Bracket (3) Ball Bearing (4) Steel Cap (5) Security Plate(optional) (6) Box(up) (7) Euroblock (8) Oct tube (09) Tubular Motor (10) Side Rail (11) Entry Guide (12) Slat cap (13) Bottom Beam (14)Plastic Stopper (15)Shutter Slat (16) Box( ...

Supplier: Shenzhen Jiaxingyuan Science Technology Co., Ltd.

[China Manufacturers]

GMC-A-1 Extinguisher Disassembling Bench

Feb 06, 2013

GMC-A-1 Extinguisher Disassembling Bench can be used for assembling various portable extinguishers The GMC-A-1 Extinguisher Disassembling Bench can be used for assembling various portable extinguishers. Various extinguisher spare parts can be stored in the drawer of the bench. GMC-A-1 Extinguisher Disassembling Bench

Supplier: Shanghai Grand Wing International Trading Co., Ltd.

[China Manufacturers]

Air fresher for car

Dec 02, 2012

2012 Newest mini auto ozone generator car air purifier 1.High quality 2.Ozone Output:6mg/hr 3.DC12V,0.8W 4.Cigar lighter Size:8.5 x 2 x 2 cmWeight:29gInput:+12VOperating current:<60MAOzone density:3mg/hAnion density:≥60million/cm3Advantages:1. Small and exquisite design, It is an excellent product for gift 2. This product produces the ozone and anion can rapidly eliminate the car inside soot, ...

Supplier: Chengdu Eastsun International Co., Ltd.

[China Manufacturers]

MODEL GRL-BX3 The Roller Oven

Jul 06, 2012

MODEL GRL-BX3 The Roller Oven we can suppy many kinds of analysis instruments. any inquiry ,pls don't hesitate to inform me The Roller Oven MODEL GRL-BX3DESCRIPTIONthe temperature control of heating furnace uses the newest microcomputer intelligent control technology set the temperature directly and digital display the results. The deviation can be displayed to ensure high accuracy.the dynamical ...

Supplier: Qingdao Xili Tools Manufacture Ltd.

[China Manufacturers]

Protective Unit Tester and Surge Arrester Tester

Feb 02, 2013

Test protective units to avoid damage of valued equipment from sudden strong electrical current, thunder and others Protective Unit Tester and Surge Arrester Tester

Supplier: Anhui Technology Imp. & Exp. Co., Ltd.

[China Manufacturers]

CNC prototypes

Feb 01, 2013

Prototype sample, mock up sample,machining model, CNC prototyping 1.maetrial:aluminum 2.application: machines' accessory Prototype sample, mock up sample, model, hand-making model, Artificial Model, machining model, CNC prototyping1) quality is strictly controlled2) price is competitive and best service3) precise manufacture4) more than 10 years experienceWe use CNC machine to produce prototype ...

Supplier: Ningbo Haishu Blacking Industry & Trade Co., Ltd.

[China Manufacturers]