rapid prototyping and injection molding,China rapid prototyping and injection molding Manufacturers, Suppliers

Refrigerant Recycling Machine,1HP, with oil and gas separator

Jun 16, 2012

... /h Refrigerant Recovery Machine,1HP, with oil and gas separator, envrionmental and efficient~~Key Features: 1. Ergonomic well balanced ... design provides fast speed in recycle and injection.5. Multi-function valve design and automatic clearance of remaining refrigerants.6. ... shell adopts one-off rotary technology with high intensity and concussion resistance.7. Overall protection device, safe credibility ...

Supplier: Guangzhou Qilin Environmental Technology Firm

[China Manufacturers]

CR-2000 common rail pump and injector tester

Mar 31, 2013

... output circuitry of the solenoid driving signal* Measure and LCD display rail pressure* To test if ... fuel line and to the CR tester by harness. The tester is set to continuous injection mode. The ... by harness. The tester is set to single injection mode to allow observing the nozzle spray pattern ... or orifice plugged. Checking the Injectors return oil and injection oil. if you have any question or inquiry ...

Supplier: Taian Labaodi Automobile Testing Equipment Co., Ltd.

[China Manufacturers]

injection mold auto PP door plastic

Apr 03, 2012

... to our design,inspection and tooling department.2.we will make tooling and processing schedule sheet during Injection plastic mold’s ... 7.our inspection department will flowing and controlling the tooling processing.8.Mould Test and injection moulding spot report ,we’ll send ... you report with the samples by air carrier.9.Injection plastic mold ...

Supplier: Taizhou Huangyan Xiyuan Mould Co., Ltd.

[China Manufacturers]

CR2000 Common Rail Injectors and Pumps Tester

Mar 31, 2013

... the output circuity of the solenoid driving signal* Measure and LCD display the rail pressure* To test if the ... a high pressure fuelline and to the CR tester by harness*The testeris set to continuous injection mode.* The CR ... pressure fuel line and to the CR tester by harness.The tester is set to single injection mode to allow ... or orifice plugged.* Checking the injectors returm oil and injection oil.

Supplier: Guangzhou Xun'ao Automotive Equipment Co., Ltd.

[China Manufacturers]

Plastic Injection Machine

Mar 31, 2013

PE, PET, PVC etc plastic injection machine, bottle preform injection, cap injection, shoes, and drum plastic injection machine.* plastic injection for PET, PE, PP, PVC etc,* to make preform, cap, case, bag,* mold clamping force of 48-2,000 metric tons and* injection weight of 45-16,000g.

Supplier: Shanghai Kingstep Machinery Co., Ltd.

[China Manufacturers]

rapid inflation valve

Sep 15, 2012

*Certification;SGS report. *Material:POM *Assit high pressure products inflation Item No : BPk-802Name :valveDiameter :65mmMaterial : pomN.W :80g/pcPacking :50pcs/PE bag 100pcs/sackFunction : Airtight mainly installed in high-pressure inflatable products,used to assist in its rapid inflation and deflation.Pictures of products and using method samples: rapid inflation valve

Supplier: Dongguan Pengke Electron Technology Co., Ltd.

[China Manufacturers]

Injection moud

Oct 28, 2012

Injection Mould,Injection Moulding,Injection Molding, Auto parts mould,Automobile plastic mould,car door mould Injection Mould,Injection Moulding,Injection Molding,Auto parts mould,Automobile plastic mould,car door mould. Injection moud

Supplier: Taizhou Huangyan Jinnuo Mould Co., Ltd.

[China Manufacturers]

Custom plastic injection parts

Feb 11, 2013

... are designed,made and tested by our experienced technical team using the latest CAD facility4) . 15 injection lines We can ... :1.We are the professional factory of plastic extusion and injection products2.We have rich experience of making plastic extrusion ... and injection products3.We have a group of experienced and skilled workers4.Provide one-stop service ...

Supplier: Shenzhen Hengxuan Plastic Products Co., Ltd.

[China Manufacturers]

nylon film tube for composite molding

Jan 29, 2013

nylon film tube for composite molding 1,used in thermoforming blow molding operations nylon film tube for composite molding1.width:10mm-1200mm( ... operation;6.good elongation,heat resistance and gas-seal property;7.used in thermoforming and blow molding operations of composites materials.8.such ... stick, mast to fiberglass compositss. nylon film tube for composite molding

Supplier: Xiamen Xingwang Industrial & Trading Co., Ltd.

[China Manufacturers]

Conduit pipe clamp with rubber and screw

Mar 31, 2013

... are available 3.zinc plated Conduit pipe clamp with rubber and screw Name: Pipe ClampMOQ:2000psSize:6"Sample:AvailableMaterial:According ... : price is based on the product’s material,size and quantityProducing process:punch,hydraumatic,weld,lock screw,packingFeature:1) with ... the pipes.6.Two-screw pipe clamp with patented rapid locking and readjusting mechanism.7.Because of reliable click mechanism, the ...

Supplier: Cixi Cavort Hardware Co., Limited

[China Manufacturers]

good price and high quality for fkm rubber gasket

Mar 31, 2013

fkm rubber gasket 1. Best price and high quality 2. OEM service 3. Prompt delivery: 1 ... -90degreeMode of productionCompression and injectionProduction CapabiltyRubber compression/injection machines including 150T,200T,250T, 300T and 500TSize/colorThe size and color can be ... be UL, FDA, ROSH or REACH approved, and free test slabs and hardness testers can be offered for customer's testingPackageInner ...

Supplier: Xiamen Lindas Hardware Industrial Co., Ltd.

[China Manufacturers]

no needle mesotherapy machine for whitening injection electroporation machine beauty equipment mesotherapy no needles

May 25, 2012

... inject head Power:30W with CE and OEM no needle mesotherapy machine for whitening injection electroporation machine beauty equipment mesotherapy no ... to acceptance of the guests. Setting the inject speed of and injection volume according to the consistency of product 5 click "Start ... e-inject head, liquid products injection start 6 Beautician hold the e-inject on skin and move slowly in circle or ...

Supplier: Beijing Boxiang Xingwang Technology Co., Ltd.

[China Manufacturers]

Molding Silicone Rubber

Jun 23, 2012

... ,Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.Features of rtv2 liquid silicone ... with general hardness of 28-32A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold ... -temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength , tear strength and elongation. Molding Silicone Rubber

Supplier: Xiamen Xin De Li Investment & Development Co., Ltd.

[China Manufacturers]

PP injection recycled PP pellet plastic masterbatch machine

Mar 31, 2013

PP injection recycled PP pellet plastic masterbatch machine 1.absorb water 2 ... 20-72 hours 3.Low price 4.RoHS report PP injection recycled PP pellet plastic masterbatch machine Desiccant masterbatch of PP ... & Cosmetic container, Lubricant & Paint container, etc)Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc ...

Supplier: Foshan Laicai Color Masterbatch Industry Co., Ltd.

[China Manufacturers]

High speed Fully Automatic carrier tape molding machine

Mar 31, 2013

... feeding buffer could slove the problem of tape bending and damage caused by unstable feeding .3.Preheating system:PLC ... preheating under the function of vacuum and hot air , Continuous rotary mould and rapidly molding .Guid by guidance mechanism reslease from ... mould become expect pocket .5.Cutting system: equip with Guidance mechanism and ...

Supplier: Shenzhen SAM Electronic Equipment Co., Ltd.

[China Manufacturers]

flame-retardant material for nylon reinforced and heat-shrinkable tube

May 26, 2012

... Cyanurate is goohas good flame-retardant material for nylon reinforced and heat-shrinkable tape. packing:25-20kg/ bag 1. Brief ... mechanism can be summarized as catalyzing carbon layer to expansion and gas dilution mutually in condensation phase.2. Product indexItemindexAppearancewhite ... 240-260 °C, mold temperature is 60-70 °C, and injection pressure is 600-800Mpa.4) Applied in PE, EVA cable ...

Supplier: Shanghai Xusen Non-Halogen Smoke Suppressing Fire Retardants Co., Ltd.

[China Manufacturers]

Automatic Tissue water bath and hot plate

Feb 14, 2013

... tech control system make it precision in temperature and rapid heating and baking slice.Technical Data:1)Water Temperature for ... spreading: indoor temperature-90°C(maximum) adjustable and automatically thermostatic2)Temperature for roasting: indoor temperarure-90° ... C(maximum) adjustable and automatically 3)Memory function: Automatically retain set temperature ...

Supplier: Jinhua Yidi Medical Appliance Co., Ltd.

[China Manufacturers]

plastic injection mould

Feb 02, 2013

plastic injection tooling fixture plastic injection molding product assembly plastic injection toolingplastic injection moldingproduct assemblyfixture plastic injection mould

Supplier: Dongguan Vision Plastic Co., Ltd.

[China Manufacturers]

23kg/day with Spray Evaporator and 350W Input Power Cube Ice Maker

Jan 10, 2013

... big cores: 1 Microcomputer intelligent control technology.Accurate and reliable anotrol system which is easy to operate.Automatically ... precision,interference,stalbeland reliable performance.6 A wide temperature and wide power technology.Wide voltage design adaptable,wide ... hygienic.8 Fast ice technology.Quantitatively filling water,rapid cycling and high efficient cooling system have led to the ...

Supplier: Zhengzhou Boke Instrument Equipment Co., Ltd.

[China Manufacturers]

Silicone Rubber for Mould (for crystal molding)

Jan 16, 2013

... for 25times. 3.used in epoxy imitation diamonds and crystal molding. Product NameAdditional Type Liquid Silicone Rubber for Mould ... strength1825KN/mApplication FeatureAdvantages: High transparency. Good de-moulding and can be de-moulded for 25 times. It has ... It has good transparent degree and demoulding effect, widely used in epoxy imitation diamonds, and crystal molding. Silicone Rubber for Mould ...

Supplier: Zhejiang Runhe Chemical New Material Co., Ltd.

[China Manufacturers]