low melting point metal,China low melting point metal Manufacturers, Suppliers

Die Casting Parts

Jul 01, 2012

... description:Die casting is the process where molten metal is injected into a mold under high pressure ... chamber process. In the cold chamber process the metal is ladled into the injection chamber for each ... shot. There is less exposure of the molten metal to the chamber walls and plunger. This is ... in the molten metal. The hot chamber process is used for metals of low melting point and high fluidity ...

Supplier: Taizhou Zhiyuan Trading Co., Ltd.

[China Manufacturers]

OEC-1350 Optical Lenses Vacuum Coater

Mar 31, 2013

... for vapor deposition on the surface of metal,oxides,compound and other high melting point materials.It can also coat super ... length of 87 (for evaporation materials with large consumption and low melting point) or hole Φ48*18 crucibleIon source (optional)1.5KVA ... .2. Light controller adopts multi-wavelength full spectrum end point analysis technology, determines film by analyzing monitoring chip 370 ...

Supplier: Shanghai Vakia Coating Technology Co., Ltd.

[China Manufacturers]

Methylcyclopentadienyl manganese tricarbonyl

Jul 08, 2012

... not super into 18 mg/L, Gasoline octane 2-3 (metal unit weight than the octane level of tetraethyl lead twice ... ; 6) Non-toxic, do not cause environmental pollution; 7) The low melting point, is not easy to prove that facilitate the practical use ...

Supplier: Anhui Graceman Imp/Exp Development Co., Ltd.

[China Manufacturers]

silica sand

May 17, 2012

... fluorite is CaF2.It is a kind of low melting point of minerals. Because of its melting point melt temperature is lower, metallurgy is mainly ... to the harmful impurities sulfur, phosphorus slag and react to metal easy separation, the desulfurization, dephosphorization role. Smelting ore with fluorite ...

Supplier: Qingdao Highsky International Trade Co., Ltd.

[China Manufacturers]

Magnesium Aluminum Alloy Powder

Mar 31, 2013

... iron drumDelivery time: 15-20 daysCharacteristicThe aluminum magnesium metal alloy powder burns easiest, producing the heat with sending ... rare earths and zirconium. Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which ... aluminium alloys yield cost effective products due to the low melting point, although they generally have lower tensile strengths than ...

Supplier: Quanzhou Jubao Chemical Trading Dept.

[China Manufacturers]

30% welding rod

Mar 31, 2013

... type of mediate welding material which has good welding effect ,low melting point ,fine wettability and shaping, electrical conductivity and corrosion resistance. ... but also the melting point. This type of welding rod will be melting quickly and filling in the blank of base metal. It makes ... type of welding rod will be melting quickly and filling in the blank of base metal. To make the welding joint ...

Supplier: Hangzhou Huaguang Advanced Welding Materials Co., Ltd.

[China Manufacturers]

aluminum screen

Apr 01, 2013

... .Aluminum mesh advantage:Lightweight and strongHigh electrical conductivityLow specific gravityLow melting point 1220 Fahrenheit (660 Celsius)Significant resistance for atmospheric corrosionCosts less ...

Supplier: Web Wire Mesh Co., Ltd.

[China Manufacturers]

p20+Ni plastical mould steel

Jun 30, 2012

... various large-sized or medium-sized precision plastic mould and low melting point alloy parts,like tim,zinc and Lead alloy casting mould ... L/C at sight or T/T Dongguan Bo Yunte Metal Co., Ltd. was established in 1999. It is located in ...

Supplier: Wuhan Sanzhao Mould Steel Co., Ltd.

[China Manufacturers]

Transparent Acrylic sheet for processing

Apr 01, 2013

... achieves 93%, is higher than the glass penetrability(5) Low melting point: PMMA melting point approximately 130-140 °C (265-285 °F) compared ... to glass approximately 1000°C high temperature low many(6) High ... weight only then simple glass's half,the metal aluminum (belongs to light metal) 43%2. Advantages(1) Light-admitting quality ...

Supplier: Shenzhen Xionghua Insulation Material Co., Ltd.

[China Manufacturers]

12kg Ingot

Apr 01, 2013

... designThe characteristics of magnesium alloys in practical metal is the lightest metal, the proportion of magnesium is about two ... , iron 1/4. It is the most practical metal light metal, high strength, high rigidity.Magnesium alloy relative ratio ... good seismic reduction of noise performance.Magnesium alloy melting point than the low melting point alloy and die casting molding performance is good. ...

Supplier: Shenzhen Jindeyuan Product Manufacturing Co., Ltd.

[China Manufacturers]

Phosphor copper brazing ring

Mar 12, 2012

... 180 Mpa) suit for brazing copper and copper alloys with low plasticity,and unfit to be used in the impacted or ... curved state .Phos/copper filler metal has the self-brazing ability, so can braze copper and ... some copper ,which can't conjugate tightlyBCuP-4It is of low melting point,It is especially fit for the automatic braze welding ,it ...

Supplier: Ningbo Yinzhou Haigu Imp.& Exp. Co., Ltd.

[China Manufacturers]

Good Performance Silver brazing alloys wires in coil

Jun 29, 2012

... joints High Silver brazing alloys can provide perfect performance with low melting point, extensive flow properties and crate strong, ductile ,rust-resistant ... ,Suitable for joining all non-ferrous metals and ferrous metal Except Aluminum and magnesium, Flux is needed for brazing ... can help as temperature depressant and reduce cost of filler metal. Nickel can improve the heat-resisting, rust-resisting ...

Supplier: GLOBAL JOINING TECHNOLOGY CO., LTD.

[China Manufacturers]

AWS BCuP-1 phosphor copper brazing rod

Aug 29, 2012

... 180 Mpa) suit for brazing copper and copper alloys with low plasticity,and unfit to be used in the impacted or ... curved state .Phos/copper filler metal has the self-brazing ability, so can braze copper and ... some copper ,which can't conjugate tightlyBCuP-4It is of low melting point,It is especially fit for the automatic braze welding ,it ...

Supplier: Hangzhou Dongzheng Industrial Co., Ltd.

[China Manufacturers]

die brass ketchen door handels

Mar 16, 2013

... , because of their high demand. Since the melting point of copper alloy is quite higher than that ... chamber process. In the cold chamber process the metal is ladled into the injection chamber for each ... shot. There is less exposure of the molten metal to the chamber walls and plunger. This is ... in the molten metal. The hot chamber process is used for metals of low melting point and high fluidity ...

Supplier: Qingdao New Taosheng Metal Products Co., Ltd.

[China Manufacturers]

High Quality Colorful Good Quality Cast Acrylic Sheet

Mar 16, 2013

... transmittance achieves 93%, is higher than the glass penetrability(5) Low melting point: PMMA melting point approximately 130-140 °C (265-285 °F) compared to ... weight only then simple glass's half,the metal aluminum (belongs to light metal) 43%PMMA sheet Application (1) Lighting applications: fluorescent ...

Supplier: Shenzhen Tinya Plastic Products Co., Ltd.

[China Manufacturers]

Bismuth ingot - High Purity!!

Jul 06, 2012

... .95-99.997%. SKYPE: DALIANWANERDA Our company can supply bismuth metal ingot 99.95-99.997%. Brand Chemical composition(%)Bi≥Impurity ... .0050.0010.0200.0010.0010.0020.005 0.050Melting point: 271.3 °CBoiling point: 1560 ± 5 °CDensity: 9.8 g / cm3Appearance: silver ... .Packing: 1ton / crateUses: used in pharmaceutical, chemical, metallurgical additives and low melting point alloy.SKYPE: DALIANWANERDA

Supplier: Dalian Wanerda Export& Import Co., Ltd.

[China Manufacturers]

Good Standard Fluorite Caf2 97% China Fluorspar Suppliers

Feb 13, 2013

... fluorite is CaF2.It is a kind of low melting point of minerals. Because of its melting point melt temperature is lower, metallurgy is mainly ... to the harmful impurities sulfur, phosphorus slag and react to metal easy separation, the desulfurization, dephosphorization role. Smelting ore with fluorite ...

Supplier: Ruyuan Yao Autonomous County Qing-Kai Mines Limited

[China Manufacturers]

BPQ series Ultrasonic jet mill used chemical

Jan 30, 2013

... temperature decreased, it is applied to the crushing of the low melting point, heat-sensitive materials, also play a role in the effect ... running of moving parts and easy maintenance, operation, small footprint, low noise and vibration advantages.The high grinding efficiency, continuous grinding ...

Supplier: Shanghai Huasan Pulverizer Co., Ltd.

[China Manufacturers]

Fluidizde Bed Jet Mill/air classifier LNJ series

Apr 10, 2012

... process, it can also be used for thermal sensitivity and low melting point material because the airflow expands sharply then decreases the temperature ... pressure operation with no environmental pollution.8.Easy to operate, low noise(≤85dBA)Application fields1.High purity super hard material. Such ...

Supplier: Mianyang Shenlong Import And Export Co., Ltd.

[China Manufacturers]

hotfixrhinestones

Dec 09, 2012

Rhinestone colors bright, strong viscosity Rhinestone gray background, green. High surface brightness, low melting point rubber-soled. hotfixrhinestones

Supplier: Vivia Floral Supplies Import And Export Company Limited

[China Manufacturers]